36W Single Output
Medical/Industrial Grade
SLE36 Desktop
Family
Page 1SLE36 DT Datasheet v0619 Copyright © 2019 SL Power Electronics Corp. All rights reserved.
CoC V5 Tier 2(2016)
≤0.075W Standby Power
9V to 36V Outputs, Up to 36W
5,000m Operating Altitude
AC Inlet IEC60320 C8 (class II) input
Medical & ITE Safety Approvals
2 x MOPP Input to Output Isolation
Suitable for Medical Equipment Up to Class BF
(^)
Low Leakage Current ≤50μA
DOE Eciency Level VI
FEATURES AND BENEFITS
Medical
Industrial
Model Number Volts
(*1)
Current Rated Power
Ripple &
Noise
(max)(*2)
Voltage
Tolerance
Line & Load
Regulation
Eciency
(Average)
Start Up
Delay
SLE36S0903N01 9.0V 3.0A 27.0W
400mV
pk-pk
±5%
Line: ±1%
Load: ±5%
88.30% ≤3s
SLE36S1203N01 12.0V 3.0A 36.0W
400mV
pk-pk
±5% 88.30% ≤3s
SLE36S2403N01 24.0V 1.5A 36.0W
180mV
pk-pk
±5% 88.30% ≤3s
SLE36S3603N01 36.0V 1.0A 36.0W
240mV
pk-pk
±5% 88.30% ≤3s
MODEL SELECTION
VI
TÜV
SÜD
PSB
IP22
Notes:
1. Measured at output connector with 20MHz bandwidth and 0.1μF ceramic in parallel with 10μF electrolytic capacitors.
2. Other output voltages in the range of 49V through 36V are available, contact us for details.
3. “N” in the model number (SLE36S2403N01) indicates IEC60320 C8 inlet (class II).
4. “03” in the model number indicates 2.5 x 5.5 x 9.5mm straight barrel type connector. Other output connector options are available, please contact our sales representative for details.
5. Power supply is not provided with a line cord.
6. Power supplies are not medical equipment (applied parts), medical product manufacturers shall take responsibility for further evaluation of class B/BF/CF compliance of their end product.
CB
Medical: IEC60601-1, ANSI/AAMI ES60601-1
ITE: IEC62638-1, UL62638-1
UL
Medical: CAN/CSA C22.2 NO. 60601-1
ITE: CAN/CSA C22.2 NO. 62638-1
TUV
Medical: EN60601-1 ITE: EN62638-1
RCM
ITE: AS/NZS 62638.1
PSE
ITE: J62638-1 (For Class II only)
SAFETYINPUT
Input Voltage and
Frequency
90VAC–264VAC
47Hz–63Hz
Input Current
0.5A at 90VAC
Inrush Current
70A max at 240VAC cold start
Touch Leakage
Current
(max)
≤50μA at 264VAC
1
1
@
-
o
o
I+
o
1









I
-
----
---
9,5±0,3


_____________
0
0
36W Single Output
Medical/Industrial Grade
SLE36 Desktop
Family
Page 2SLE36 DT Datasheet v0619 Copyright © 2019 SL Power Electronics Corp. All rights reserved.
RELIABILITY
MTBF
>100,000 hours MIL-HDBK-217 at 25°C
Isolation Safety Rating
4,000VAC Input to Output (2 x MOPP)
ISOLATION
Weight, Packing Qty
230g, Individual Box: 48/carton; Egg-crate: 72/carton
PACKAGING
EMI/EMC COMPLIANCE
Conducted Emissions
Medical: IEC/EN 60601-1-2, CISPR 11
ITE: EN55022, CISPR 22
Radiated Emissions
Medical: IEC/EN 60601-1-2, CISPR 11
ITE: EN55022, CISPR 22
Immunity
Medical: IEC/EN 60601-1-2
ITE: EN55024, CISPR 24
Electro-Static Discharge
(ESD) Immunity on Power
Ports
EN61000-4-2, ±15kV air, ±8kV contact
Radiated RF EM Fields
Susceptibility
3
EN61000-4-3, 10V/m, 3V/m
(80MHz–2.7GMHz)
Electrical Fast Transients
(EFT)/Bursts
EN61000-4-4, ±2kV on AC port, ±1kV on
signal ports
Surges, Line to Line (DM)
and Line to Ground (CM)
EN61000-4-5, ±1kV line to line (diff mode)
Conducted RF Immunity
EN61000-4-6, 3Vrms, 6Vrms
(0.15MHz–80MHz)
Power Frequency Magnetic
Field Immunity
EN61000-4-8, 30A/m
Voltage Dip Immunity
EN61000-4-11, 0%, 70%, 0% of UT
Harmonic Current
Emissions
EN61000-3-2, Class A
Flicker Test
EN61000-3-3
PROTECTION
Overload Protection
110%–200% rated output power, Auto-recovery
Overvoltage Protection
120%–150% rated output voltage input to
reset
Short circuit Protection
Trip and restart - Hiccup Mode
Operating Temperature
0°C to 40°C
Storage Temperature
-20°C to 60°C
Weight
230 grams
Dimensions
102.0mm x 50.0mm x 33.5mm
Operating Humidity
10% RH to 90% RH, non-condensing
Storage Humidity
5% RH to 90% RH
Operating Altitude
5,000m
Dielectric Withstand
Voltage
5,656VDC input to output
Insulation Resistance
10M Ohms, 500VDC input to output
ENVIRONMENT
Disclaimer: The information and specications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for consequences arising from reproduction
errors or inaccuracies. Specications are subject to change without notice.
MECHANICAL DRAWING
Connector
(*4)
DC Cable
(*3)
UL1185 14AWG 1,000mm
2.5mm
x 5.5mm x 9.5mm, fork type, center"+"