6W Single Output
Medical/Industrial Grade
SLE06 Family
Page 1
SLE06 Datasheet v0220
Copyright © 2020 SL Power Electronics Corp. All rights reserved.
CoC V5 Tier 2(2016)
0.075W Standby Power
4.2V to 12V Outputs, Up to 6W
Up to 5,000m Operating Altitude
Interchangeable AC Plugs
Medical & ITE Safety Approvals
2 x MOPP Input to Output Isolation
Suitable for Medical Equipment Up to Class BF
(^)
Low Leakage Current
FEATURES AND BENEFITS
Medical
Industrial
Model Number Volts
(1)
Current Rated Power
Ripple &
Noise
(max)(2)
Voltage
Tolerance
Line & Load
Regulation (Average)
Start Up
SLE06 05 3B01
5.0V 1.0A 5.0W
150mV
pk-pk
±5%
Line: ±1%
Load: ±5%
73.83% 3s
SLE06 09 3B01 9.0V 0.6A 5.4W
200mV
pk-pk
±5% 73.77% 3s
SLE06 12 B01 12.0V 0.5A 6.0W
200mV
pk-pk
±5% 78.16% 3s
MODEL SELECTION
Notes:
1. Measured at output connector with 20MHz bandwidth and 0.1μF ceramic in parallel with 10μF electrolytic capacitors.
2. Other output voltages in the range of 5V through 24V are available, contact our sales reprentative for details.
3. "B" in the model number (SLE18S0503B01) indicates interchangeable blade model. "C" = N.A.fixed blade input.
4. "03" in the model number indicates 2.5 x 5.5 x 9.5mm straight barrel type connector. "99" indicated USB "A" port output. Other output connector options are available, please contact our
sales representative for details.
5. Power supply is not fitted with the AC blade, this is to be ordered separately. See outline drawing below for details
6. Power supplies are not medical equipment (applied parts), medical product manufacturers shall take responsibility for further evaluation of class B/BF/CF compliance of their end product.
* Blades sold separately
VI
INPUT
Input Voltage and
90VAC–264VAC
47Hz–63Hz
Input Current
0.2A at 90VAC
Inrush Current
30A max at 240VAC cold start
Touch Leakage
Current
(max)
CB
Medical: IEC60601-1 ITE: IEC6 -1
UL
Medical: 60601-1, SA C22.2 NO. 60601-1
ITE: UL6 -1, CAN/CSA C22.2 NO. 6 -1
TUV
Medical: EN60601-1 ITE: EN -1
RCM
ITE: AS/NZS 6 .1
CCC
ITE: GB4943.1
PSE
ITE: J6 -1
KC
K6 -1 (4.2VDC to 6VDC model only)
SAFETY
SLE06 05 3 01
5.0V 1.0A 5.0W
150mV
pk-pk
±5%
Line: ±1%
Load: ±5%
73.83% 3s
SLE06 09 3 01 9.0V 0.6A 5.4W
200mV
pk-pk
±5% 73.77% 3s
SLE06 12 01 12.0V 0.5A 6.0W
200mV
pk-pk
±5% 78.16% 3s
6W Single Output
Medical/Industrial Grade
SLE06 Family
Page 2SLE06 Datasheet v0220 Copyright © 2020 SL Power Electronics Corp. All rights reserved.
ENVIRONMENT
RELIABILITY
MTBF
>100,000 hours MIL-HDBK-217 at 25°C
Operating Temperature
0°C to 45°C
Storage Temperature
-20°C to 60°C
Weight
85 grams
Dimensions
73.5mm x 42.5mmx 30.7mm
10% RH to 90% RH, non-condensing
5% RH to 90% RH
Operating Altitude
5,000m
Dielectric Withstand
Voltage
5,656VDC input to output
Insulation Resistance
100M Ohms, 500VDC input to output
4,000VAC Input to Output (2 x MOPP)
ISOLATION
EMI/EMC COMPLIANCE
Conducted Emissions
Medical: IEC/EN 60601-1-2, CISPR 11
ITE: EN55022, CISPR 22
Radiated Emissions
Medical: IEC/EN 60601-1-2, CISPR 11
ITE: EN55022, CISPR 22
Medical: IEC/EN 60601-1-2
ITE: EN55024, CISPR 24
Electro-Static Discharge
Ports
EN61000-4-2, ±15kV air, ±8kV contact
Radiated RF EM Fields
3
EN61000-4-3, 10V/m, 3V/m
(80MHz–2700MHz)
Electrical Fast Transients
(EFT)/Bursts
EN61000-4-4, ±2kV on AC port, ±1kV on
signal ports
Surges, Line to Line (DM)
and Line to Ground (CM)
EN61000-4-5, ±1kV line to line (diff mode)
EN61000-4-6, 3Vrms, 6Vrms
(0.15MHz–80MHz)
EN61000-4-8, 30A/m
EN61000-4-11, 0%, 70%, 0% of UT
Harmonic Current
Emissions
EN61000-3-2, Class A
Flicker Test
EN61000-3-3
PROTECTION
Overload Protection
120%–150% rated output power, Auto-recovery
Overvoltage Protection
120%–150% rated output voltage input to
reset
Short Circuit Protection
Trip and restart - Hiccup Mode
MECHANICAL DRAWING
1500±10%
Unit: mm
Interchangeable AC Blade Options
DC Cable
(*3)
Connector
(*4)
UL2468 22AWG 1,800mm, 2.5mm x 5.5mm x mm ,
center “+”
USB 2.0 port for 5V ( PIN1 "+", PIN4 "-", PIN 2&3 shorted)
US/Japan Europe UK Australia
China
30.7±1.0
42.50±1.0
73.50±1.0
42.50±0.5
73.50±0.5
33.00
ø5.5��0.05
* Blades sold separately
,
4,000VAC Input to Output (2 x MOPP)
ISOLATION
4,000VAC Input to Output (2 x MOPP)
ISOLATION