CT100 August 2021
© 2021 Crocus Technology 1
CT100 · Rev. 2.0
CT100
1D Linear Sensor
• Operating Magnetic Field Range: ±50 mT
• Stable Magnetic Performance over Temperature
• Linearity Error: ±0.5% from -20 mT to +20 mT
• Differential Outputs
• Supply Voltage: 1.0 V to 5.5 V
• Operating Temperature: -40°C to +150°C
• Package Options:
o 6-lead SOT23
o 6-lead DFN, 1.50 × 1.50 × 0.45 mm
o KGD (Known Good Die) in Wafer Form
The CT100 is a 1D linear sensor in full-bridge configuration
from Crocus Technology developed on its patented
XtremeSense® TMR technology. The total magnetic field
range for the CT100 is from -50 mT to +50 mT and it
achieves a linearity error of ±0.5% for a range of -20 mT to
+20 mT while providing XtremeSense® per
achieve unparalleled temperature stability across the full
temperature range. It supports a wide operating voltage
range of 1.0 V to 5.5 V.
It is available in a 6-lead SOT23 package and for space
critical applications, a low profile and small form factor 6-
lead DFN package that is 1.50 × 1.50 × 0.45 mm in size.
The CT100 is also made available in die form where it will
be shipped as unsawn wafers (wafer map files
provided to indicate known good die).
• Linear Measurements
• Proximity Sensing
Ordering Information
Part Number
Operating
Output Type Package
Packing
CT100LW-IS6 -40°C to +85°C
Differential
6-lead SOT23
2.90 x 2.80 x 1.20 mm
Tape & Reel
CT100LW-HS6 -40°C to +125°C
CT100LW-FS6 -40°C to +150°C
CT100LW-ID6 -40°C to +85°C
Differential
6-lead DFN
1.50 x 1.50 x 0.45 mm
Tape & Reel
CT100LW-HD6 -40°C to +125°C
CT100LW-FD6 -40°C to +150°C
CT100LW-KGD -40°C to +150°C Differential Wafer Form Unsawn Wafer