Technical Data Sheet
Metallic Systems
Accessories - Type 45 Brass Elbow
CMG House - Station Road - Coleshill - B46 1HT - United Kingdom
Sales Support tel: +44 (0) 2476 368500
Customer Services Iv.customerservice@gb.abb.com
Technical Support e-mail: cmg.conduitsystems@tnb.com - www.adaptaflex.com
The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice.
Part No Thread A Thread B
Nominal Dimensions (mm)
C D E F G
B/M16/45 M16 x 1.5 M20 x 1.5 13.0 34.0 22.0 10.6 24.0
B/M20/45 M20 x 1.5 M20 x 1.5 13.0 34.0 22.0 14.3 24.0
B/M25/45 M25 x 1.5 M25 x 1.5 17.0 44.0 28.0 17.6 32.0
B/M32/45 M32 x 1.5 M32 x 1.5 17.0 60.0 36.0 24.6 41.0
Features
• 45º combined fitting & elbow
• IP40 - 67 rated
• Degree of mechanical protection is very high
Brass elbow, for insertion into threaded entries &
knockouts using a locknut
Degree of Mechanical Protection
Very High
Fitting Characteristics
45º combined fitting & elbow
Approvals
UV Protection
Very High
Type of Material Finish
Nikel Plated Brass N/A
For Use With - Conduit Series
All Adaptaflex Metallic conduit fittings
Testing Data
See last page
Temperature Range
Static Application: -65ºC to +150ºC
Dynamic Application: -45ºC to +150ºC
Fire Performance
Test Standard Performance Rating
Not Rated Not Rated
Conformity
BSI Kitemark KM-35161
Low voltage directive
IP Rating Appropriate Fitting
For use with: see below
IP67
Type SPL A, B &
M fittings
IP66 Type SP M fittings
IP54
Type SP A & B
fittings
IP40
Type S A & B
fittings
Technical Data Sheet
Metallic Systems
Accessories - Type 45 Brass Elbow
CMG House - Station Road - Coleshill - B46 1HT - United Kingdom
Sales Support tel: +44 (0) 2476 368500
Customer Services Iv.customerservice@gb.abb.com
Technical Support e-mail: cmg.conduitsystems@tnb.com - www.adaptaflex.com
The Company’s policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice.
Thread Data
Metric Standard thread conforming to EN60423 & BS3643
Thread
Size
mm
Ext Thread Outside
Diameter
Int Thread Inside
Diameter
Pitch
M10 10.0 8.9 1.0
M12 12.0 10.4 1.5
M16 16.0 14.4 1.5
M20 20.0 18.4 1.5
M25 25.0 23.4 1.5
M32 32.0 30.4 1.5
M40 40.0 38.4 1.5
M50 50.0 48.4 1.5
M63 63.0 61.4 1.5
M75 75.0 73.4 1.5
Part No Thread A Thread B
Nominal Dimensions (mm)
C D E F G
B/PG11/45 PG11 M16 x 1.5 13.0 34.0 22.0 10.6 24.0
B/PG13/45 PG13.5 M20 x 1.5 13.0 34.0 22.0 14.3 24.0
B/PG16/45 PG16 M20 x 1.5 17.0 44.0 28.0 14.3 32.0
B/PG21/45 PG21 M25 x 1.5 17.0 60.0 36.0 17.6 41.0
Thread Data
PG German Standard thread conforming to DIN40430
Thread
Size
Ext Thread Outside
Diameter
Int Thread Inside
Diameter
Pitch
PG7 12.5 11.3 1.27
PG9 15.2 13.9 1.41
PG11 18.6 17.3 1.41
PG13.5 20.4 19.1 1.41
PG16 22.5 21.2 1.41
PG21 28.3 26.8 1.59
PG29 37.0 35.5 1.59
PG36 47.0 45.5 1.59
PG42 54.0 52.2 1.59
PG48 59.3 57.8 1.59