Confidential
C
R1
3
MHF 5L
R
2016/04/28M.NZ1604620
Ken
3 Z190991 K.T 2019/07/30
Y.S
2
Z181728 M.N 2018/12/27
1 Z180759 M.N 2018/09/14 Ken
1.30 max.
2.00
±0.15
3.55 ±0.15
②CONTACT
①HOUSING
③GROUND CONTACT
CATCHING AREA
NOTE 3-2-2.
HATCHED AREA: Ni PLATING AREA
1.03
±0.15
QKE-DFFDE06-02 REV.11
DAI-ICHI SEIKO CO., LTD.
1/3
A3
mm
20:1
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
APP.
BY
REV.
REVISION RECORD
ECN DATE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
CUSTOMER COPY
2016/04/28M.Nomoto
Y.Hashimoto
K.Narita
2016/05/03
2016/05/03
20714
GENERAL TOLERANCE.
PLUG Ni TOP (0.81)
PART No.
20714-001R-81
Recommended P/N 20714-001R-81
3 GROUND CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.05μm MIN.
[Ni PLATING AREA] Ni ONLY
2 CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.05μm MIN.
1 HOUSING LCP UL94V-0, BLACK (GF 30%)
NO. DESCRIPTION MATERIAL FINISH , REMARKS
NOTES.
1. APPLICABLE CONNECTOR: 20566-001E-01
2. PERMISSIBLE LOAD OF CABLE AT MATING
3. MATING AND UNMATING INSTRUCTION
3-1. MATING
MATE THE CONNECTOR VERTICALY AS MUCH AS POSSIBLE, ADJUSTING THE MATING AXIS OF PLUG AND
RECEPTACLE. DO NOT SLANT MATE.
3-2. UNMATING
3-2-1. IN CASE OF UNMATING BY PULLING TOOL (PART NO. 90612-0001)
USE THE PULLING TOOL AS THE FOLLOWING DRAWING, AND PULL PLUG TO VERTICAL DIRECTION AS
DIRECTLY AS POSSIBLE.
3-2-2. IN CASE OF UNMATING DIRECTLY BY HAND
CATCH THE CATCHING AREA OF PLUG, AND PULL PLUG TO VERTICAL DIRECTION AS DIRECTLY AS
POSSIBLE.
Offered as harness only.
↑PROHIBITED
2N MAX.→
NOTE 2.
↓PROHIBITED
PLUG PART NO.
20714-001R-81
COAXIAL CABLE
RECEPTACLE PART NO.
20566-001E-01
MATING CONDITION
↑
②
①→
NOTE 3-2-1.
NOTE 3-1.
PART NO. 90612-0001
��
Confidential
C
R1
3
MHF 5L
R
QKE-DFFDE06-02 REV.11
DAI-ICHI SEIKO CO., LTD.
2/3
A3
mm
-
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
CUSTOMER COPY
20714
GENERAL TOLERANCE.
PLUG Ni TOP (0.81)
ITEMS SPECIFICATION
RECOMMENDED APPLICABLE CONNECTOR
PART No.
20566-001E-01
RATING VOLTAGE 60 V AC (R.M.S)
RATING FREQUENCY DC～12 GHz
OPERATING TEMPERATURE 233～363 K (-40℃～+90℃)
VSWR 1.3 MAX. AT DC～3 GHz, 1.4 MAX. AT 3～6 GHz, 1.5 MAX. AT 6～12 GHz
MAIN CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 20 mohm MAX.
GROUND CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 100 mohm MAX.
INSULATION RESISTANCE INITIAL: 500 Mohm MIN. / AFTER TEST: 100 Mohm MIN.
DIELECTRIC WITHSTANDING VOLTAGE 200 V AC, 1 MINUTE
DURABILITY 30 CYCLES
UNMATING FORCE (INITIAL / AFTER TEST) INITIAL: 5 N MIN. /AFTER TEST: 3 N MIN.
CRIMP STRENGTH 10 N MIN.
PRODUCT SPECIFICATION PRS-2236
TEST REPORT TR-16049
INSTRUCTION MANUAL HIM-16014
APPEARANCE CRITERIA No. QLS-A***