Confidential
C
R2
3
MHF 5
R
Ken
Ken
3 Z181728 M.N 2018/12/27
Ken
2
Z180759 M.N 2018/09/14
1 Z160461 M.N 2016/04/28
Tad 2015/08/11Z1508920
3.24 ±0.15
1.0 MAX.
②CONTACT
③GROUND CONTACT
①HOUSING
HATCHED AREA: Ni PLATING AREA
0.745 ±0.15
2.00 ±0.15
↑
②
20566-001E-01
MATING CONDITION
20711-001R-81
PLUG PART NO.
RECEPTACLE PART NO.
COAXIAL CABLE
NOTE 2.
2N MAX.→
↑PROHIBITED
↓PROHIBITED
NOTE 3-2-1.
①→
NOTE 3-1.
PART NO. 90612-0001
↓
CATCHING AREA
NOTE 3-2-2.
PART NO. APPLICABLE CABLE OUTER CONDUCTOR
20711-001R-81
AWG#36 (0.64 O.D.) SPIRAL SHIELD
AWG#36 (0.81 O.D.) SINGLE BRAIDED SHIELD
Recommended P/N 20711-001R-81
3 GROUND CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.02μm MIN.
[Ni PLATING AREA] Ni ONLY
2 CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.03μm MIN.
1 HOUSING LCP UL94V-0, BLACK
NO. DESCRIPTION MATERIAL FINISH , REMARKS
NOTES.
1. APPLICABLE CONNECTOR: 20566-001E-01
2. PERMISSIBLE LOAD OF CABLE AT MATING
3. MATING AND UNMATING INSTRUCTION
3-1. MATING
MATE THE CONNECTOR VERTICALY AS MUCH AS POSSIBLE, ADJUSTING THE MATING AXIS OF PLUG
AND RECEPTACLE. DO NOT SLANT MATE.
3-2. UNMATING
3-2-1. IN CASE OF UNMATING BY PULLING TOOL (PART NO. 90612-0001)
USE THE PULLING TOOL AS THE FOLLOWING DRAWING, AND PULL PLUG TO VERTICAL DIRECTION
AS DIRECTLY AS POSSIBLE.
3-2-2. IN CASE OF UNMATING DIRECTLY BY HAND
CATCH THE CATCHING AREA OF PLUG, AND PULL PLUG TO VERTICAL DIRECTION AS DIRECTLY
AS POSSIBLE.
Offered as harness only.
QKE-DFFDE06-02 REV.11
A3
DAI-ICHI SEIKO CO., LTD.
1/3T.Takano
mm
20:1
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
APP.
BY
REV.
REVISION RECORD
ECN DATE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
2015/08/12
CUSTOMER COPY
K.Yotsutani
2015/08/11
SIZE
Y.Hashimoto
2015/08/12
20711
GENERAL TOLERANCE.
PLUG Ni TOP
(0.81, 0.64)
Confidential
C
R2
3
MHF 5
R
ITEMS SPECIFICATION
APPLICABLE CABLE
AWG#36 (0.81 O.D.)
*RECOMMENDED
AWG#36 (0.64 O.D.)
RECOMMENDED APPLICABLE CONNECTOR
PART No.
20566-001E-01
RATING VOLTAGE 60 V AC (R.M.S)
RATING FREQUENCY DC～6 GHz
OPERATING TEMPERATURE 233～363 K (-40℃～+90℃)
VSWR 1.3 MAX. AT DC～3 GHz, 1.5 MAX. AT 3～6 GHz
MAIN CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 20 mohm MAX.
GROUND CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 100 mohm MAX.
INSULATION RESISTANCE INITIAL: 500 Mohm MIN. / AFTER TEST: 100 Mohm MIN.
DIELECTRIC WITHSTANDING VOLTAGE 200 V AC, 1 MINUTE
DURABILITY 30 CYCLES
UNMATING FORCE (INITIAL / AFTER TEST) INITIAL: 4 N MIN. / AFTER TEST: 2 N MIN.
CRIMP STRENGTH 7 N MIN.
PRODUCT SPECIFICATION PRS-2108 PRS-2109
TEST REPORT TR-15062 TR-15063
INSTRUCTION MANUAL HIM-16013
QKE-DFFDE06-02 REV.11
DAI-ICHI SEIKO CO., LTD.
2/3
A3
mm
-
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
CUSTOMER COPY
20711
GENERAL TOLERANCE.
PLUG Ni TOP
(0.81, 0.64)