Confidential
C
R5
4
MHF 5
R
Ken
4
Z181412 M.N 2018/12/27 Ken
3 Z170699 M.N 2017/06/19
Ken
2
Z160460 M.N 2016/04/28
1 Z141054 Y.H 2014/09/14 Tom
Y.H 2014/03/27Z1402780
5
0
°
m
i
n
.
5
0
°
m
i
n
.
20615-00*R-48
20566-001E-01
PLUG PART NO.
RECEPTACLE PART NO.
COAXIAL CABLE
MATING CONDITION
1.0 MAX.
PART No. PLATING APPLICABLE CABLE OUTER CONDUCTOR
20615-001R-48 ALL Au
AWG#38 (0.48 O.D.) SPIRAL SHIELD
20615-002R-48 SELECTIVE Ni
Recommended P/N 20615-002R-48
NOTE 4.
NOTES
1. APPLICABLE CONNECTOR: 20566-001E-01
2. PERMISSIBLE LOAD OF CABLE AT MATING
3. MATING AND UNMATING INSTRUCTION
3-1. MATING
MATE THE CONNECTOR VERTICALY AS
MUCH AS POSSIBLE, ADJUSTING THE MATING AXIS OF PLUG AND RECEPTACLE. DO NOT SLANT MATE.
3-2. UNMATING
3-2-1. IN CASE OF UNMATING BY PULLING TOOL (PART NO. 90612-0001): USE THE PULLING TOOL AS THE
FOLLOWING DRAWING, AND PULL PLUG TO VERTICAL DIRECTION AS DIRECTLY AS POSSIBLE.
3-2-2. IN CASE OF UNMATING DIRECTLY BY HAND: CATCH THE CATCHING AREA OF PLUG, AND PULL PLUG
TO VERTICAL DIRECTION AS DIRECTLY AS POSSIBLE.
4. PRECAUTIONS FOR CABLE POSITION
THE PLUG SHALL NOT BE PLACED WITHIN 50 DEGREES ANGLE FROM CENTER OF THE SIGNAL CONTACT.
TILT THE PLUG AT LEAST 50 DEGREES FROM THE CENTER OF A SIGNAL CONTACT.
3 GROUND CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.05μm MIN.
2 CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.05μm MIN.
1 HOUSING LCP UL94V-0, BLACK
NO. DESCRIPTION MATERIAL FINISH , REMARKS
Offered as harness only.
QKE-DFFDE06-02 REV.11
GENERAL TOLERANCE.
K.Yotsutani
mm
1/3
A3
T.Takano
20:1
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
APP.
BY
REV.
REVISION RECORD
ECN DATE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
DAI-ICHI SEIKO CO., LTD.
2014/03/27
2014/03/27
2014/03/27
CUSTOMER COPY
Y.Hashimoto
20615
PLUG (0.48)
2 N MAX.→
↓PROHIBITED
NOTE 2.
↑PROHIBITED
NOTE 3-2-1.
①→
↑
②
CONTACT
PLUG
PROHIBITED
SIGNAL
ALLOWED
GROUND
CONTACT
↓
PART NO. 90612-0001
NOTE 3-1.
2.00
±0.15
①HOUSING
②CONTACT
③GROUND
CONTACT
HATCHED AREA:
Ni PLATING AREA
3.41 ±0.15
0.745 ±0.15
SELECTIVE Ni TYPE (PART NO. 20615-002R-48)
CATCHING AREA
NOTE 3-2-2.
Confidential
C
R5
4
MHF 5
R
QKE-DFFDE06-02 REV.11
DAI-ICHI SEIKO CO., LTD.
2/3
A3
mm
-
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
CUSTOMER COPY
20615
GENERAL TOLERANCE.
PLUG (0.48)
ITEMS SPECIFICATION
PLUG PART No.
20615-001R-48
(ALL Au PLATING TYPE)
20615-002R-48
(SELECTIVE Ni PLATING TYPE)
RECOMMENDED APPLICABLE CONNECTOR
PART No.
20566-001E-01
RATING VOLTAGE 60 V AC (R.M.S)
RATING FREQUENCY DC～6 GHz
OPERATING TEMPERATURE 233～363 K (-40℃～+90℃)
VSWR 1.3 MAX. AT 0.1 ～ 3 GHz, 1.5 MAX. AT 3 ～ 6 GHz
MAIN CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 20 mohm MAX.
GROUND CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 20 mohm MAX.
INSULATION RESISTANCE INITIAL: 500 Mohm MIN. / AFTER TEST: 100 Mohm MIN.
DIELECTRIC WITHSTANDING VOLTAGE 200 V AC, 1 MINUTE
DURABILITY 30 CYCLES
UNMATING FORCE (INITIAL / AFTER TEST) INITIAL: 4 N MIN. / AFTER TEST: 2 N MIN.
CRIMP STRENGTH 7 N MIN.
PRODUCT SPECIFICATION PRS-1939 PRS-2032
TEST REPORT TR-14026 TR-15029
INSTRUCTION MANUAL HIM-13003