Confidential
C
R1
2
MHF II
R
Ken
2
Z181523 M.N 2018/11/20
1 M.N 2018/10/29 Ken
Tad 2015/08/11Z1508900
Z181404
3.80 ±0.3
9.00
0.15
↓2 N MAX.
→4 N MAX.
RECEPTACLE
↑2 N MAX.
COAXIAL CABLE
PLUG
NOTE 2.
↑
②
CATCHING AREA
NOTE 3-2-2.
RECEPTACLE PART NO.
20279-001E-0*
20686-001R-08
MATING CONDITION
PLUG PART NO.
COAXIAL CABLE
2.0 ±0.1
①→
NOTE 3-2-1.
QKE-DFFDE06-02 REV.11
GENERAL TOLERANCE.
DAI-ICHI SEIKO CO., LTD.
1/5
A3
mm
5:1
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
APP.
BY
REV.
REVISION RECORD
ECN DATE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
CUSTOMER COPY
2015/08/11T.Yayoshi
K.Yotsutani
T.Takano
2015/08/12
2015/08/12
20686
PLUG Ni TOP (0.81)
Recommended P/N 20686-001R-08
PART NO. APPLICABLE CABLE
20686-001R-08 AWG#36 (SEE SHEET 3/5)
NOTES.
1. APPLICABLE CONNECTOR
20279-001E-0*
20314-001E-01
20431-001E-01
20441-001E-01
2. PERMISSIBLE LOAD AT MATING
3. MATING AND UNMATING INSTRUCTION
3-1 MATING
PLEASE MATE THE CONNECTOR STRAIGHTLY TO VERTICAL DIRECTION AS MUCH AS POSSIBLE,
ADJUSTING THE MATING AXIS OF PLUG AND RECEPTACLE. AS EXCESSIVE SLANT ANGLE MATING
MAY BREAK THE CONNECTOR, PLEASE DO NOT DO IT.
3-2. UNMATING
3-2-1. IN CASE OF UNMATING BY PULLING TOOL (PART NO. 90192-001)
PLEASE USE THE PULLING TOOL AS THE FOLLOWING DRAWING, AND PLEASE PULL PLUG TO
VERTICAL DIRECTION AS DIRECTLY AS POSSIBLE.
3-2-2. IN CASE OF UNMATING DIRECTLY BY HAND
PLEASE CATCH THE CATCHING AREA OF PLUG, AND PLEASE PULL PLUG OF VERTICAL DIRECTION
AS DIRECTLY AS POSSIBLE.
3 GROUND CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.02μm MIN.
[Ni PLATING AREA] Ni ONLY
2 CONTACT PHOSPHOR BRONZE
ALL OVER Ni 1.00μm MIN.
CONTACT PART Au 0.03μm MIN.
1 HOUSING LCP UL94V-0, WHITE
NO. DESCRIPTION MATERIAL FINISH , REMARKS
2.90
1.30
2.52
CONTACT
②CONTACT
③GROUND
①HOUSING
4.97
1.62 ±0.15
2.33
2.34
2.90
3.00
10.80
X
X
YY
HATCHED AREA: Ni PLATING AREA
CONNETOR
END
6.33
3.25
1.37
1.88
Confidential
C
R1
2
MHF II
R
ITEMS SPECIFICATION
APPLICABLE CONNECTOR PART No. 20279-001E-0*
RATING VOLTAGE 60 V AC (R.M.S)
RATING FREQUENCY DC～6 GHz
OPERATING TEMPERATURE 233～363 K (-40℃～+90℃)
VSWR
1.3 MAX. AT 0.1～3 GHz
1.5 MAX. AT 3～6 GHz
MAIN CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 20 mohm MAX.
GROUND CONTACT RESISTANCE INITIAL: 20 mohm MAX. / AFTER TEST: ⊿R 100 mohm MAX.
INSULATION RESISTANCE INITIAL: 500 Mohm MIN. / AFTER TEST: 100 Mohm MIN.
DIELECTRIC WITHSTANDING VOLTAGE 200 V AC, 1 MINUTE
DURABILITY 30 CYCLES
UNMATING FORCE (INITIAL / AFTER TEST) INITIAL: 4 N MIN. AFTER TEST: 2 N MIN.
PRODUCT SPECIFICATION PRS-2106
TEST REPORT TR-15060
PACKING STANDARD 300-272
INSTRUCTION MANUAL HIM-12010
QKE-DFFDE06-02 REV.11
DAI-ICHI SEIKO CO., LTD.
2/5
A3
mm
5:1
6 MAX.
DWG.
±2°
±0.5
±0.3
±0.2
CHK.
APP.
DWG. No.
DATE
DATE
DATE
TITLE
ANGLE
30 OVER 120 MAX.
6 OVER 30 MAX.
UNIT
PROJECTION
SERIES No.
SHEET
REV.
SCALE
SIZE
CUSTOMER COPY
20686
GENERAL TOLERANCE.
PLUG Ni TOP (0.81)