MPZ3524 THRU MPZ3540
PRESS-FIT MOTOLOLA DIODES
特征 FEATURES
MP
.35安培工作温度为125度,无热损耗下.
35 Ampere Operation At TL=125℃ With No Thermal Runaway.
.正向压降低.Low forward voltage drop
.低漏电. Low leakage current
.高浪涌承受能力.High surge current capability
机械数据 MECHANICAL DATA
.封装:铜材质 MP封装. Case: Copper MP
.端子:镀金端子,焊接按照 MIL-STD-202,方法 208.
Terminals: Plated terminals, solderable per
MIL-STD-202, method 208.
.极性: 灌注红色环氧树脂（端子为正/P 型）
灌注黑色环氧树脂（端子为负/N 型）
Polarity : By RED Color Epoxy Potting. (Positive)
By BLACK Color Epoxy Potting. (Negative)
.重 量：6.8 克. Weight: 6.8grams
Dimension in millimeters
极限值和电参数 TA= 25℃除非另有规定. 单相,正半弦波,60HZ,阻抗或电感负载.为电容装载,减 少电流的 20%
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ Ambient temp. Unless otherwise specified.Single phase, half sine wave, 60HZ,resistive or inductive load.
For capacitive load, derate current by 20%
SYMBO
L
MPZ3524 MPZ3528 MPZ3540
UNITS
最大峰值反向电压
Maximum Current Peak Reverse Voltage
VRRM
16 20 34
Volts
最大反向有效电压
Working Peak Reverse Voltage
VRWM
16 20 34
Volts
最大直流阻断电压
Maximum DC Blocking Voltage
VDC
16 20 34
Volts
崩溃电压最小值
Breakdown voltage Min@ IBR=100mA/TA=25
℃
VBRL
19
24 38
Volts
www.shunyegroup.com.cn
崩溃电压最大值
Breakdown voltage Max@ IBR=100mA/TA =25
℃
VBRH
24 32 42
Volts
��大正向平均整流电流 T
L
=125℃
Maximum Average Forward Rectified Current
I(AV)
35
Amps
正向峰值浪涌电流
Peak Forward Surge Current 8.3ms Sing le
Sine-wave on Rated Load (JEDEC Method)
IFSM
400
Amps
25A 直流电时最大正向瞬间电压降
Maximum Instantaneous Forward Voltage
Dro
p
at 25A DC
VF
1.0
Volts
最大反向漏电流 T
A
=25℃
Maximum DC Reverse Current at Rated DC
Blocking Voltage
IR
0.2
uA
正向电压温度系数 IF=10mA
Forward Voltage Temperature Coefficient
VFTS
2
mV/℃
工作温度存储温度
Operating AND S torage Temperature Range
TSTG/ TJ
-55 to +150
℃
NOTE: 1.Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C.
RATING ANDCHARACTERISTIC CURVES MPZ3524 THRU MPZ3540
FIG. 1 –最大正向平均电流降额
FIG. 1 –MAXIMUM AVERAGE FORWARD CURRENT
DERATING
FIG. 2 –最大非重复正向浪涌电流
FIG. 2 –MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
FIG. 3 –脉冲波形
FIG. 3 – PULSE WAVEFORM
FIG. 4–正向特性曲线(典型)
FIG.4 – TYPICA FORWARD CHARACTERISTICS
FIG.5–脉冲额定曲线
FIG.5–PULSE RATING CURVE
www.shunyegroup.com.cn