2.40 mm TO 50 GHz
Cable Mates:
RF047-A, RF086,
RF085, RF23C
2.40 mm
Cable Connectors
PRF24
SERIES
-
END 1
CONNECTOR
-
END 2
CONNECTOR
-
OVERALL LENGTH
RF047-A
(1.2 mm) .047" overshield DIA 29 AWG
millimeter wave cable
RF086
= (2.18 mm) .086" overshield DIA 23 AWG
millimeter wave cable
RF085
= (2.16 mm) .085" overshield DIA 24 AWG
millimeter wave cable
RF23C
= MWC-2350CU-01 millimeter wave cable
with copper foil shield
–24SJ
= 2.40 mm Straight Jack
–24SP
= 2.40 mm Straight Plug
–“XXXX”
= Overall Length in
millimeters
–0100 (100 mm)
3.94" minimum
(RF047-A, RF085, RF086)
–0152 (0152 mm)
5.984" minimum
(RF23C)
ALSO AVAILABLE
1.35 mm, 1.85 mm, 2.92 mm, SMPM = RF047-A
1.85 mm, 2.92 mm, SMPM = RF086
2.92 mm = RF085
2.92 mm, SMPM = RF23C
2.40 mm
Cable Assemblies
RF047-A, RF085,
RF086, RF23C
VSWR
RF047-A: 1.35 max.
RF086: 1.40 max.
RF085: 1.40 max.
RF23C: 1.40 max.
CONNECTORS FOR INDUSTRY STANDARD CABLES
PRF24-J-C-EP-085-SS Harbour SS405, exible alternative to RG 405
PRF24-J-C-EP-405-BS RG 405, .085, semi-rigid
PRF24-P-C-EE-085-SD Harbour SS405, exible alternative to RG 405
PRF24-P-C-EP-120A-SS Semex HP120, low loss exible
PRF24-J-C-EP-160-SS Semex HP160, low loss exible
PRF24-P-C-EP-160-SS Semex HP160, low loss exible
PRF24-J-C-EP-140B-SS IW 1401, low loss exible
PRF24-P-C-EP-140B -SS IW 1401, low loss exible
PRF24-J-C-EP-150B-SS IW 1501, low loss exible
PRF24-J-C-EP-150-SS Dynawave DF150, low loss exible
PRR24-J-C-EP-086-SS .086 Temp-ex, low loss exible
PRF24-P-C-EP-086-SS .086 Temp-ex, low loss exible
P-C = Cable Plug
J-C = Cable Jack
EE = Plating (50 µ” gold center contact & outer contact)
EP = Plating (50 µ” gold center contact, passivated outer contact)
SS = Straight, Solder Clamp
SD = Straight, Direct Solder
BS = Bulkhead, Solder Clamp
2.40 mm
Board Connectors
240
INTERFACE STANDARD
(5.994)
.236
Min.
(5.258)
.207
Min.
(4.7955) .1888
(4.7701) .1878
DIA
(5.8928) .232
(5.7912) .228
DIA
(1.0490) .0413
(1.0338) .0407
DIA
(2.4079) .0948
(2.3927) .0942
DIA
(1.0490) .0413
(1.0338) .0407
DIA
(2.4079) .0948
(2.3927) .0942
DIA
(4.749) .187
(4.724) .186
DIA
(7.112) .280
(7.010) .276
DIA
(5.84)
.230
(10.87)
.428
(10.16)
.400
DIA
(4.83)
.190
(6.64)
.222
(7.16)
.282
(1.14)
.045
(5.84)
.230
(10.87)
.428
–CM SHOWN –CMM SHOWN
Unless otherwise approved in writing by Samtec, all parts and components are designed and built according to Samtec’s specications which are subject to change without notice.
240
-
GENDER
-
TYPE
-
PL ATING
-
ORIENTATION
-
TERMINATION
-
OPTION
-
PACKAGING
–J
= Jack
–P
= PCB
Mount
–EP
= 50 µ"
(1.27 µm)
Gold center
contact,
Passivated
outer
contact
–ST
= Straight
–CM
= Compression
Mount Stripline
–CMM
= Compression
Mount Microstrip
–1
= without
Screws
–2
= With
Screws
Leave blank for
tray packaging
–K
= Individually
bagged
F-221 (Rev 10MAR22)
samtec.com/240