ESP32-C3-01M
DS-ESP32-C3-01M-1
ESP WIFI MODULE
Features
• Complete Wi-Fi 802.11b/g/n,1T1R mode data
rate up to 150Mbps
• Support BLE5.0 and rate support:125Kbps,
500Kbps,1Mbps,2Mbps
• 32-bit RISC-V single-core processor, supports a
clock frequency of up to 160 MHz, with 400 KB
SRAM,384 KB ROM,8KB RTC SRAM
• Support UART/PWM/GPIO/ADC/I2C/I2S interface,
temperature sensor, pulse counter
• DIP-18 package
• Integrated Wi-Fi MAC/BB/RF/PA/LNA/ BLE
• Support multiple sleep modes, deep sleep electric
current is less than 5uA
• UART rate up to 5Mbps
• Support STA/AP/STA+AP mode and mix modecc
• Support Smart Config (APP)/AirKiss (WeChat) of
Android and IOS One-click network configuration
• Support UART port local upgrade and remote
firmware upgrade (FOTA)
• General AT commands can be better understand
• Support secondary development, integrated Linux
development environment
• ESP-C3-01M only supports the built-in 4MByte
Flash of the chip, and does not support Flash
expansion.
Product Overview
This module core processor ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC),
designed for various applications such as internet of things (IoT), mobile devices, wearable
electronics, smart home, etc.
ESP32-C3 with industry-leading low power and RF performance, supporting Wi-Fi IEEE802.11b/
g/n agreements and BLE 5.0. ESP32-C3 chip is equipped with 32-bit RISC-V single-core
processor, operating frequency up to 160 MHz. The chip is support to have secondary
development without using other microcontrollers or processors. The chip has a built-in 400 KB
SRAM,384 KB ROM,8KB RTC SRAM.Also, the chip support external Flash while it built-in
4Mbit Flash. ESP32-C3 chip supports a variety of low-power consumption working states,
which can meet the power consumption requirements of various application scenarios.