DS-FERRET-2

FERRET Receiver

1 Channel Mini Receiver

Features

• 1 Relay Changeover Contacts

• Switches up to 1Kw

5A@230Vac

• Range up to 1KM

(Depending on Transmitter)

• Secure data protocol

• Easy pairing

• Compact Size 23.5x76mm

• Push Fit Wire Terminals

• Supply 6-24Vdc

• Optional 110-230VAC PSU

Module

• CE compliant

Applications

• Commercial Control

• Remote switching

• Remote lights

Description

The FERRET modules provide an easy “plug and Play” Remote Control Receiver for

many applications. The relay output provides Changeover contacts rated 5A at

230Vac to a resistive load.

The FERRET Receiver operates from a 6-24Vdc and all connections are via easy

screwless terminals.

Ferret is compatible with many RF Solutions Transmitters and can be combined

together to provide a remote control.

The PSU module provides a 110-230Vac input with 12V output which can be used

as a power supply for the Ferret Receiver module.

Please note this product is for Professional Use Only.

FERRET 6-24Vdc

PSU Module 110-230Vac

FERRET Receiver

DS-FERRET-2

Part No

Description

FERRET-4R1 Receiver module 6-24V version 433MHz

FERRET-8R1 Receiver module 6-24V version 868MHz

FERRET-9R1 Receiver module 12V version 918MHz

Ordering Information

Part No

Description

FERRET-PSU 110—230Vac to 12V Power Supply for FERRET RX

FERRET Receiver 6-24Vdc

110—230Vac Power Supply Module

Intended Use

Ferret Receiver intended use is to provide a switching Changeover contact to control an

appliance via RF control. The essential performance of the Ferret Receiver is to receive

signals from an RF Transmitter for control of the Load circuit.

Safety Warning using 110—230Vac Version

• Installation Failure to follow the instructions may result in risk of injury to persons or property.

• Personnel installing and maintaining this equipment must be qualified Electricians with appro-

priate knowledge and experience who can identify and prevent Electrical hazards.

• Product is not independently isolated, ISOLATE the mains electricity supply before connecting

and observe any relevant safety precautions. Product must be connected to a switch fused

(spur/supply) or BS 1363 Plug. It is recommended a single Fuse Spur is used to supply the

FERRET and Load jointly so that they are isolated together.

• When Used to switch mains voltage Loads ensure the circuitry is suitable protected to prevent

electric shock.