SCALE™-2 2SP0320x2A0(C)-DP1400B1200T103714
www.power.com/gate-driver Page 1
2SP0320x2A0-DP1400B1200T103714 and
2SP0320x2A0C-DP1400B1200T103714
Data Sheet
Compact, high-performance, plug-and-play dual-channel IGBT driver based on
SCALE™-2 technology for individual and parallel-connected modules in 2-level,
3-level and multilevel converter topologies
Abstract
The SCALE™-2 plug-and-play driver 2SP0320x2A0-DP1400B1200T103714 / 2SP0320x2A0C-
DP1400B1200T103714 (Coated version using ELPEGUARD SL 1307 FLZ/2 from Lackwerke Peters with a typical
thickness of 50µm) is a compact dual-channel intelligent gate driver designed for Danfoss IGBTs
DP1400B1200T103714. The driver features an electrical interface (2SP0320T) or a fiber-optic interface
(2SP0320V and 2SP0320S) with a built-in DC/DC power supply.
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to
www.power.com/gate-driver/go/plug-and-play
Features Applications
Plug-and-play solution
Allows parallel connection of IGBT modules
For 2-level, 3-level and multilevel topologies
Shortens application development time
Extremely reliable; long service life
Built-in DC/DC power supply
20-pin flat cable interface (2SP0320T)
Fiber-optic links (2SP0320V & 2SP0320S)
Duty cycle 0... 100%
Active clamping of V
ce
at turn-off
IGBT short-circuit protection
Monitoring of supply voltage
Safe isolation to EN 50178
UL compliant
Suitable for DP1400B1200T103714
Wind-power converters
Industrial drives
UPS
Power-factor correctors
Traction
Railroad power supplies
Welding
SMPS
Radiology and laser technology
Research
and many others
SCALE™-2 2SP0320x2A0(C)-DP1400B1200T103714
Data Sheet
www.power.com/gate-driver Page 2
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
common data that apply to the whole series, please refer to “Description & Application Manual for 2SP0320T
SCALE-2 IGBT Drivers” (electrical interface) or “Description & Application Manual for 2SP0320V and 2SP0320S
SCALE-2 IGBT Drivers” (fiber-optic interface) on www.power.com/gate-driver/go/2SP0320.
When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a
particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes
the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other
than those specified. Incorrect use may result in failure.
Mechanical Dimensions
Dimensions: Refer to the relevant “Description and Application Manual”
Mounting principle: Connected to IGBT module with screws
Fiber-Optic Interfaces
Interface Remarks Part type #
Drive signal input 2SP0320V, fiber-optic receiver (Notes 21, 22) HFBR-2522ETZ
Drive signal input 2SP0320S, fiber-optic receiver (Notes 21, 22) HFBR-2412Z
Status output 2SP0320V, fiber-optic transmitter (Notes 21, 23) HFBR-1522ETZ
Status output 2SP0320S, fiber-optic transmitter (Notes 21, 23) HFBR-1412Z