Specications are subject to change without notice.

AFLglobal.com

800.235.3423

Fusion Splicing

Strip, Clean & Fiber Prep

DESCRIPTION AFL NO.

AFL PowerStrip

Kit

Carrying case, ber holder clamping system, blades and

centralizers for 125/250 µm and 125/900 µm ber, power supply

230 V AC or 100/120 V AC, power cord 2 m (6.5 feet), cleaning

brush and tool set (hex keys, adjustment screwdriver)

S012808

Coating Blades

80/125 µm S014859

80/160 µm S012656

125/250 µm S012596

125/400 µm S012628

125/500 µm S014865

125/900 µm S012604

204/360 µm S014734

220/350 µm S017002

230/500 µm S014863

250/400 µm S014400

250/900 µm S014866

290/450 µm S014735

400/600 µm S014719

500/615 µm S017003

600/800 µm S014736

660/800 µm S017086

1000/1400 µm S014737

Blade Removal Tool

PowerStrip Blade Removal Tool S012704

Centralizers

125 µm S014860

160 µm S012652

250 µm S012600

360 µm S014738

400 µm S012624

450 µm S014739

500 µm S014864

600 µm S014718

680 µm S017009

800 µm S014740

900 µm S012608

1400 µm S014741

Power Supply

12 V DC W/PLUG ADPT S015185

* Custom blades and centralizers available on request.

Specifications

PARAMETER VALUE

Fibers Stripped - Single Buffered

Fiber

Cladding diameter: 125 µm standard, 80 µm optional

Coating diameter: 250 µm and 900 µm standard,

160 µm and 400 µm optional

Clamping System Fujikura ber holder clamp; compatible with FSM-45F/PM

and 100 series ber holders

Stripping Length Up to 35 mm

Heater Temperature Range 110°C to 150°C (230°F to 302°F)

Heating Time 1.5 to 13 seconds

Cycle Time Approximately 5 seconds/cycle (after heating)

Power Supply Input: 100 to 240 V AC, 50/60 ± 3 Hz; Output: 12 V DC, 12 W, 1 A

Dimensions (L x W x D) 209 mm x 57 mm x 45 mm (8.25 x 2.25 x 1.8 inches)

Weight 0.7 kg (1.5 lbs)

AFL PowerStrip

AFL PowerStrip is a thermal stripper used in high strength splicing. Using the proven blade and

centering design of the Schleuniger FiberStrip 7030 in addition to the ber holder system, the

AFL PowerStrip automatically centers the ber, heats the buffer or coating and strips the buffer

at a controlled rate with perfect alignment. The ber holder system reduces ber handling,

making this tool ideal for any production environment.

Features

• 250 µm and 900 µm ber capability

• Short cycle time

• Lightweight and portable

Ordering Information