Document No.
2 / 10
1. Scope
CABLINE V Connector is wire to board connector for SGC Cable and Discrete cable on pitch of 0.4mm.
2. Objectives
This specification covers the requirements for product performance and test methods of CABLINE V Connector.
3. Ratings
Amperage ・・・・・・・・・・・・・・・・ 0.1A AC/DC [AWG#44] (Per contact pin / Up to 40 contacts)
0.24A AC/DC [AWG#42] (Per contact pin/ Up to 40 contacts)
0.3A AC/DC [AWG#40] (Per contact pin / Up to 40 contacts)
0.8A AC/DC [AWG#36] (Per contact pin / Up to 12 contacts)
*Testing by a real machine is recommended
because temperature rise may affected by actual situation
Voltage ・・・・・・・・・・・・・・・・・ 100V AC (Per contact pin)
Storage Condition : 248~333K (-25℃~+60℃) / 85%RH MAX. / for 1 year
*Non condensing
Operating Temperature : 233~358K (-40℃~+85℃) / 85%RH MAX.
*Containing temperature rise by energizing
4. Construction, Material and Finish
4.1 Plastic Components
(1) Plug Housing ・・・・・・・・・・・・・ Heat Resisting Plastics, UL94V-0, Black
Red Phosphorus Free
(2) Receptacle Housing ・・・ Heat Resisting Plastics, UL94V-0, Black
Red Phosphorus Free
4.2 Metallic Components
(1) Plug
(a) Contact ・・・・・・・・・・Copper Alloy
Plating ・・・・・・・・Au Plating
(b) Shell A ・・・・・・・・・Stainless steel or Copper Alloy
Plating ・・・・・・ ①Sn-Cu Plating
②Sn Plating
(c) Shell B ・・・・・・・・・・・Copper Alloy
Plating ・・・・・・ ①Sn-Cu Plating
②Sn Plating
(2) Receptacle
(a) Contact ・・・・・・・・・・ Copper Alloy
Plating ・・・・・・・ Au Plating
(b) Shell ・・・・・・・・・・・・・・・ Copper Alloy
Plating ・・・・・・ ①Sn-Cu Plating
②Sn Plating
5. Test Methods and Performance
5.1 Test Condition
Unless otherwise specified, all tests and measurements shall be performed under the following conditions
in accordance with MIL-STD-202G.
Temperature ・・・・・・・・・・・・ 288~308K (15~35℃)
Humidity ・・・・・・・・・・・・・・・ 45~75%
Atmospheric Pressure ・・・・ 866~1066hPa (650~800 mmHg)