1 / 8
Document No.
PRS
-
2676
-
0
5
EN
Confidential
C
I
-
PEX Inc.
QKE-DFFDE06-08 REV.12
MHF
®
7S Connector
Part No. Plug: 20980-001R-13 Receptacle: 20981-001E-02
Product Specification
Qualification Test Report No. TR-20043
5 S22158 April 13, 2022 H.Lu Y.Yukiko M.Takemoto
4 S21500 October 26, 2021 Y. Imaji H. Nakamura Hiro Takahashi
3 S21114 March 11, 2021 Y. Imaji H. Nakamura Hiro Takahashi
2 S20673 December 25, 2020
Y. Imaji H. Nakamura Hiro Takahashi
Rev. ECN Date Prepared by Checked by Approved by
MHF 7
S
Connector
Product Specification
Document No.
PRS
-
2676
-
0
5
E
N
2 / 8
Confidential
C
1. Scope
This product specification defines the test conditions and the performances of the MHF 7S Connector
2. Product Name and Parts No.
2.1 Product Name
MHF 7S Connector
2.2 Parts No.
Plug: 20980-001R-13
Receptacle: 20981-001E-02
3. Rating
3.1 Applicable Cable
(1) Description
Inner conductor: AWG#32(7/0.08)
Silver plating annealed copper wire
Dielectric core: Fluoro-plastics, diameter 0.70(+/-0.03)mm, nominal thickness 0.23mm
Outer conductor: 16/5/0.04, diameter 0.90(+/-0.09)mm, tin-copper alloy
Jacket: Fluoro-plastics, diameter 1.13(+0.08,-0.05)mm , nominal thickness 0.12mm
(2) Requirements
Characteristic impedance: 50±2Ω by TDR method
Nominal capacitance(Reference value): 97 pF/m
Conductor resistance of inner conductor at 293K (20℃)(Reference value): 520Ω/km
Insulation resistance: 1,500MΩ・km MIN.
Dielectric withstand voltage: no breakdown at AC 500V for 1 minutes.
3.2 Operating Conditions
Voltage: 60 Vrms AC
Operating temperature: 233 to 363K(-40℃ to +90℃) (Containing temperature rise by current)
Nominal characteristic impedance: 50Ω
Frequency: DC~15 GHz
VSWR: [Mating condition] 1.30 MAX at 0.1~3 GHz
1.35 MAX at 3~6 GHz
1.40 MAX at 6~9 GHz
1.45 MAX at 9~12 GHz
1.50 MAX at 12~15 GHz
Operating humidity: 90% max
3.3 Storage Conditions
Storage temperature: 248 to 333K(-25℃ to 60℃)
Storage humidity: 85% max. (Non-condensing)
4. Test and Performance
Test Condition
Unless otherwise specified, all tests and measurements shall be performed under the following conditions in accordance with MIL-
STD-202.
Temperature: 288K to 308K(15℃ to 35℃)
Pressure: 866hPa to 1066hPa (650 mmHg to 800 mmHg)
Relative humidity: 45 to75% R.H.