Document No.
2 / 8
1. Scope
This product specification defines the test conditions and the performances of the MHF 5L Connector AWG#33 φ0.81 Cable.
2. Product Name and Parts No.
2.1 Product Name
MHF 5L PLUG
MHF 5 RECEPTACLE
2.2 Parts No.
Plug: 20714-001R-81
Receptacle: 20566-001E-01
3. Rating
3.1 Applicable Cable
(1) Description
Inner conductor: AWG#33(7/0.071) ,Silver plating annealed copper wire
Dielectric core: Fluoro-plastics, diameter 0.62 mm
Outer conductor: Nominal diameter0.72 mm, silver plating annealed copper wire or tin plating
annealed copper wire
Jacket: Fluoro-plastics, diameter 0.81 mm
(2) Requirements
Characteristic impedance : 50 (+3, -3) ohm by TDR method
Nominal capacitance (Reference value): 95 pF/m
Conductor resistance of inner conductor at 293K (20℃): 700 ohm/km MAX.
Insulation resistance: 1000 mega-ohm・km MIN.
Dielectric withstand voltage: no breakdown at 1000V AC for 1 minutes.
3.2 Operating Conditions
Rated voltage AC60Vr.m.s
Nominal characteristic
impedance
50 ohm.
Frequency DC~12GHz
VSWR Plug: 1.3 MAX. (DC~3GHz), 1.4 MAX. (3~6GHz) 1.5 MAX.(6~12GHz)
Receptacle: 1.3 MAX. (DC~3GHz), 1.4 MAX. (3~6GHz) 1.5 MAX.(6~12GHz)
Service Temperature 233K~363K(-40℃~90℃)
3.3 Storage Conditions
Storage temperature: 248 to 333K(-25℃ to 60℃)
Storage humidity: 85% max. (Non-condensing)
4. Test and Performance
Test Condition
Unless otherwise specified, all tests and measurements shall be performed
under the following conditions in accordance with MIL-STD-202.
Temperature: 288K to 308K(15℃ to 35℃)
Pressure: 866hPa to 1066hPa(650mmHg to 800mmHg)
Relative humidity: 45 to75% R.H.