13.05.2022
Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de
Euromas Aluminium / Euromas F05
Enclosure, aluminium
A 122
Order no.: 01122000
* = Available on request.
Dimensions
Dimensions
220 x 120 x 81 mm
Product drawing
Characteristics
Colour of enclosure group
Grey, similar to RAL 7001
Protection class
IP 66
Enclosure Material
G Al Si 12, PU foamed seal
For details see Technical Information
Scope of delivery
Lid and base, lid screws (V2A), 4 screws for installation/earthing
Note
On the A 198, because of the wall-mounting drill holes inside the
sealed lip, expert sealing of the wall-mounting is necessary to
achieve protection class IP 66.
G = design with transparent lid (PC)
Technical documentation / Downloads
Technical drawings
3D product data in STEP format: Registration necessary
Drawing for mechanical processing: 01122000 A-122-G.dxf (306.6 KB)
13.05.2022
Milling contours are shown here as a DXF file. (Sub D, USB, HDMI, cable glands, ...)
Product drawing in PDF format: 01122000 A-122.pdf (76.3 KB)
Product drawing in DXF format: 01122000 A-122.dxf (505.3 KB)
Works Test Certificates
682 WPZ-Euromas-Aluminium DE.pdf (163.7 KB)
682 WPZ-Euromas-Aluminium EN.pdf (143.7 KB)
Product information
euromas-aluminium-euromas-f05 en.pdf (992.0 KB)
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensationelement.
» Additional information
Matching accessories
Mast mounting, stainless steel V2A, uncoated
96500122 MH 122
96500220 MH 220
Mounting panels, galvanised sheet steel
21001500 M For A 122-123, P 331
Earthing bars with fitted terminal clamps
21004700 E For A 122-123, P 331
Wall brackets, screw-on at rear
21004300 WL For A 119-198, P 330-355
DIN rails DIN EN 60715 TH 15, galvanised steel
21003310 TS 15 For A 122-123