Sp ecificatio n
STA :STA :
Assembly: Enclosure & cable loom
Cable entries: 2 x M20 clearance
Cable loom: Pre-wired with termination PCBA
Terminals: 0.5 to 4.0mm² cables
Ingress Protection: IP66 Type 13/3R
Enclosure
material:
UL94V0 & 5VA FR ABS/PC
Enclosure colour: RAL3000 Red, RAL7038 Grey and White
Lens material: PC
Fixings: Stainless Steel
Operating temp: -40° to +70°C [-40° to +158°F]
Storage temp: -40° to +70°C [-40° to +158°F]
Relative humidity: 95% at 20°C [68°F]
STA2 Weight: 0.95kg/2.09Ibs
STA3 Weight: 1.15kg/2.53Ibs
STA4 Weight: 1.35kg/2.97Ibs
A l ar m Sou n d e r :A l ar m Sou n d e r :
Type: SONF1 alarm horn sounder
Maximum output: 100dB(A) @ 1 metre [91dB(A) @ 10ft/3m]
Nominal output: 99dB(A) @ 1m +/- 3dB – Tone 1 [90dB(A) @ 10ft/3m]
No. of tones: 10 (UKOOA / PFEER compliant)
No. of stages: 2 (AC voltage variants 1 stage)
Volume control: On board potentiometer
Effective range: 30m/99ft @ 1KHz
Monitoring: Reverse polarity diode protection on DC units.
Xe n on Beacon :Xe n on Beacon :
Type: L101X Xenon Strobe Beacon
Energy: 5 Joules (5Ws)
Flash rate: 1Hz (60 fpm)
Peak Candela: 500,000 cd – calculated from energy (J)
Effective Intensity
cd:
250 cd – calculated from energy (J)
Peak Candela: 86,935 cd* – measured ref. to I.E.S.
Effective Intensity
cd:
200 cd* – measured ref. to I.E.S.
Lens colours: Amber, Blue, Clear, Green, Magenta, Red, Yellow
Tube life: Emissions are reduced to 70% after 8 million flashes
L . E . D Be ac on :L . E . D Be ac on :
Type: L101H multi-function LED
Light source: High intensity 18 x Cree© SMT White L.E.D. array
Function: High Power Steady
Blinking – 425ms ON 75ms OFF
1.0Hz (60 fpm) – 200ms ON 800ms OFF
1.33Hz (80fpm) – 150ms ON 600ms OFF
Double Flash
Triple Flash
2.0Hz (120fpm) – 125ms ON 375ms OFF
Temporal Flash
Peak/Effective
Intensity cd:
180cd – measured ref. to I.E.S.
Lens colours: Amber, Blue, Clear, Green, Magenta, Red, Yellow
Part Co d es
Stack assembly:
Par t Cod e:Par t Cod e: I d en t . :I d en t . : D escr i p ti on :D escr i p ti on :
Product type: STA2 Alarm Horn with 2 x Beacons Signal Stack / Tower
Voltage: AC230
AC115
DC024
230V ac 50/60Hz
115V ac 50/60Hz
12/24V dc
Cable entries: [e] A 2 × 20mm clearance
Stopping plug
material: [m]
A ABS
Option: [s] 0 Standard configuration
Product version: [v]A UL, cULs
Product option: [o] 1
X
Z
Standard product
Custom configuration – contact E2S
Custom alarm tone software – contact E2S
Enclosure: [x] G
R
W
Grey RAL7038
Red RAL3000
White
Beacon components:
Par t Cod e:Par t Cod e: I d en t . :I d en t . : D escr i p ti on :D escr i p ti on :
Product type: ST-L101X L101X Xenon Beacon 5J
Voltage: AC230
AC115
DC024
DC012
230Vac +/-10% 50/60Hz
115Vac +/-10% 50/60Hz
24Vdc – 20-28Vdc
12Vdc – 10-14Vdc
Version: [v] A1 UL, cULs
Lens colour: [y] A
B
C
G
M
R
Y
Amber
Blue
Clear
Green
Magenta
Red
Yellow
Par t Cod e:Par t Cod e: I d en t . :I d en t . : D escr i p ti on :D escr i p ti on :
Product type: ST-L101H L101H LED Beacon
Voltage: AC230
DC024
DC012
115/230Vac 50/60Hz
16-33Vdc
10-14Vdc
Version: [v] A1 UL, cULs
Lens colour: [y] A
B
C
G
M
R
Y
Amber
Blue
Clear
Green
Magenta
Red
Yellow
Example: For an alarm horn tower featuring a Xenon beacon in red plus one
L.E.D. beacon in green for a 24Vdc supply in a red housing, order the following
part codes:
STA2DC024AA0A1R
ST-L101XDC024A1R
ST-L101HDC024A1G