24.07.2021

Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde

Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de

Internorm

Seal IP 54 / EMC seal for enclosures and extension sets

IN-DI

Order no.: 31500000

* = Available on request.

Characteristics

Colour of enclosure group

Enclosure Material

PS (polystyrene); for details see Technical Information

Scope of delivery

1 m seal

Note

FIP front panels or front doors are needed if ingress protection is required for the enclosure.

Aluminium or conductive copper lacquering is required to achieve EMC protection.

Important!

To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a

pressure compensation element.

» Additional information

Technical documentation / Downloads

Technical drawings Product information

Internorm GB.pdf (362.9 KB)