SN3101
Serial Device Server
The SN3101 3-in-1 Serial Device Server supports RS-232, RS-422 and RS-485 data transfers, as well as providing Ethernet connectivity for a wide
variety of serial devices used in commercial applications. These include industrial control,data acquisition, access control, environment
monitoring,banking, telecoms, remote site management, etc. This total serial data transfer system transforms the capability of legacy serial devices,
and allows them to take advantage of the speed and reliability of today's modern communication techniques.
Features
Provides over IP access for industrial serial devices.
Software selectable RS-232/422/485 3-in-1 serial port
Built-in 15KV ESD serial port protection
Max. baud rate: 460 Kbps
Wide range of versatile serial operation modes - Console Management, Real COM, TCP Server, TCP Client, UDP, Modbus, Serial Tunnel and
Virtual Modem
High security via 128-bit/256-bit SSL (TLS v1.0) encryption for serial data transmission
Redundancy support via multiple simultaneous Real COM, TCP Server, and TCP Client connections
64 Kbyte port buffer prevents data loss when the network is down
Real COM driver for Windows 2000/XP/2003/Vista
Real TTY driver for Linux, Fixed TTY driver for Unix*
Modbus Ethernet-to-Serial support
Modem emulation enables existing modem-based applications to make connections over IP networks
Virtual Terminal support (VT320, VT52, VT100, VT220)
System configuration via Web Console (HTTP/HTTPS), Telnet/SSH Console and Windows utility
Backup/restore and firmware upgrading via Web Console(HTTP/HTTPS) and Windows utility
Easy-to-use Windows utility (2000/XP/2003/Vista) for auto discovery, multiple device setting and monitoring
Centralized external authentication support for RADIUS, LDAP(S), MS Active Directory
SNMP MIB II and RS-232 MIB for network management
SMTP and SNMP trap event notification
Choice of power input: AC-DC adapter or DC direct
* Fixed TTY Driver Supports 1) Sco Unix, Sco OpenServer; 2) Unix Ware 7, SVR 5; 3) Unix Ware 2.1, SVR 4.2; 4) QNX 4.25, QNX 6; 5)
FreeBSD; 6) Solaris 10; 7) AIX 5.x; 8) HP-UX 11i
Specifications
Serial Device Server
Connectors
Serial 1 x DB-9 Male (Black)
Network 1 x RJ-45 Female (Black)
Power 1 x 2-pin Terminal Block (Green)
1 x DC Jack (Black)
Switches
Reset 1 x Semi-recessed Pushbutton
LEDs
Power 1 (Green)
Link 1 (Green)
10/100 Mbps 1 (Orange/Green)
TxRx (ACT) 1 (Green)
Power Input
Power Adapter 100-240V AC; 50/60 Hz
Power Line
Protection
4KV burst (EFT), EN61000-4-4 2KV surge, EN61000-4-4
Power
Consumption
DC9V:2.28W:11BTU
Interfaces
Serial RS-232/422/485; Software selectable
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND
RS-485: Data+, Data-, GND
Baud Rate: 460Kbps
Protection: 15 KV ESD Protection for the serial port
Parity: None, Even, Odd, Mark, Space
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Flow Control: None, XON/XOFF, RTS/CTS
Network 10/100BaseTX; Autosensing
ARP, DHCP, DNS, HTTP, HTTPS, ICMP, IP, TCP, UDP, NTP, PPP, RADIUS, Telnet, SNMP, SNMP Trap, SMTP,
SSH
Protection: 1.5 KV Magnetic Isolation
Compliance FCC Class A, CE Class A, RoHS
Environmental
Operating
Temperature
0 - 60°C