PRODUCT INFORMATION
EPIC® DATA PB Sub-D
PROFIBUS connectors with screw terminals | REPEATER function
PROFIBUS Sub-D connector, screw terminals, integrated bus termination, optional LED diagnostic/interfaces, cable outlet
35°/90°/180°
Info
Optional with LED diagnostic
M12 and REPEATER version
Versions with 2nd Sub-D interface
Supplementary automation components from Lapp
Low weight
Space requirement
Benefits
Easy connection with tried-and-tested M12 / screw terminal technology
sensor/ ac
Terminating resistor (integrated) can be switched
REPEATER version: Regeneration of data signal
(slope, power and mark-to-space ratio)
ATEX version: For use within intrinsically-safe circuits in zone 2 areas with an explosion hazard (explosive gas atmosphere
occurs only rarely and briefly)
Product features
Max. transmission rate 12 Mbit/s possible
Current consumption max. 12,5 mA
(with LED 35 mA / REPEATER 100 mA)
Supply voltage 4.75 - 5.25 V DC
(supplied from the terminal)
Terminating resistor "ON" - the outbound bus cable is disconnected
Last Update (20.10.2021) 1 / 4
©2021 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16
PRODUCT INFORMATION
EPIC® DATA PB Sub-D
REPEATER version: Easy extension of the PROFIBUS network:
- up to 3 repeaters
- 1 additional PROFIBUS segment
- galvanic isolation
Norm references / Approvals
IEC 61158, IEC 61784
UL File No. E331560
ATEX version: DIN EN 60079-0:2006, DIN 60079-15:2005 (category 3G zone 2)
Product Make-up
D-Sub plug, 9-pin, fixing screws 4-40 UNC
Improved electromagnetic compatibility (EMC) by metallized housing
Versions with additional Sub-D interface for programming/diagnostic ('PG')
For cable outer diameter: 5 – 8 mm / M12 B-coded cordsets
LED Version indicate:
bus operation - (green)
station transmission - (blue)
terminating resistor "on" - (orange)
Technical Data
Classification ETIM 5: ETIM 5.0 Class-ID: EC001132
ETIM 5.0 Class-Description: D-Sub connector
Classification ETIM 6: ETIM 6.0 Class-ID: EC001132
ETIM 6.0 Class-Description: D-Sub connector
Dimensions: 54 mm x 40 mm x 17 mm - 35°
64 mm x 40 mm x 17 mm - 90°
68 mm x 40 mm x 17 mm - 180°
70 mm x 40 mm x 17 mm - M12
(LxWxH)
Connection type: Screwing
M12
Protection rating: IP 20
Terminating resistor: 150 Ω
Interfaces: Sub-D socket, 9-pin
Terminal blocks up to 1.0 mm² /M12 B-coded
Permissble ambient conditions: Operating temperature: -25°C to +85°C
*The max. temperature for UL is 60 °C
Note
Photographs and graphics are not to scale and do not represent detailed images of the respective products.
Prices are net prices without VAT and surcharges. Sale to business customers only.
Last Update (20.10.2021) 2 / 4
©2021 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16