Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Model XDL15-3-030S
Rev B
PRELIMINARY
Delay Line
DESCRIPTION
The XDL15-3-030S can be used in amplifier linearization applications from
135 – 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading
to obtain longer delay. The Xinger® delay lines are a low cost, high quality
alternative to the traditional coaxial and filter solutions presently available.
Parts have been subjected to rigorous qualification testing and units are
100% tested. Produced with 6 of 6 RoHS compliant tin immersion finish.
ELECTRICAL SPECIFICATIONS*
Features:
Production Friendly
Consistent Delay
Stable Over Temperature
Surface Mountable
Available in Tape & Reel
Non-Lead Solder Paste
Compatible
Lead Free
100% Tested
MSL 2
Frequency
(MHz.)
Return
Loss
(dB)
(min)
Insertion
Loss per ns
(dB/ns)
(max)
Group
Delay (nS)
Operating
Temp.
(ºC)
Power
Handling
(Watt)
135-2700
-12
-1.5
2.85 ± 0.30
-55 to +140
1
* Specification based on performance of unit properly installed on Anaren Test Board 66111-0001.
* Specifications subject to change without notice. Refer to parameter definitions for details.
Mechanical Outline
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
Model XDL15-3-030S
Rev B
PRELIMINARY
PIN CONFIGURATION
Pin 1
Pin 2
Pin 3
Pin 4
Input
DNC- Do not connect,
Do not ground
DNC- Do not connect,
Do not ground
Output
Output
DNC- Do not connect,
Do not ground
DNC- Do not connect,
Do not ground
Input
TYPICAL PERFORMANCE: 100 MHz to 6000 MHz
100 700 1300 1900 2500 3100 3700 4300 4900 5500
-50
-40
-30
-20
-10
0
Frequency (MHz)
Return Loss 1(dB)
Return Loss 1 XDL15-3-030S (OVERTEMP)
-55ºC
25ºC
85ºC
125ºC
100 700 1300 1900 2500 3100 3700 4300 4900 5500
-50
-40
-30
-20
-10
0
Frequency (MHz)
Return Loss 2(dB)
Return Loss 2 XDL15-3-030S (OVERTEMP)
-55ºC
25ºC
85ºC
125ºC
100 700 1300 1900 2500 3100 3700 4300 4900 5500
2
2.2
2.4
2.6
2.8
3
3.2
3.4
3.6
3.8
4
Frequency (MHz)
Group Delay(ns)
Group DealyXDL15-3-030S (OVERTEMP)
-55ºC
25ºC
85ºC
125ºC
100 700 1300 1900 2500 3100 3700 4300 4900 5500
-5
-4.5
-4
-3.5
-3
-2.5
-2
-1.5
-1
-0.5
0
Frequency (MHz)
Insertion Loss (dB)
Insertion Loss XDL15-3-030S (OVERTEMP)
-55ºC
25ºC
85ºC
125ºC
CASCADING XDL15-3-030S
If more than 3ns delay is needed, cascading XDL15-3-030S can provide group delay of 6ns, 9ns and 12ns. Gap of
2mm between the cascaded parts is recommended with solder mask in between.