1
LED Revolving Warning Light
S100LR/ S125LR
• Protection rating : IP44
• Ambient operating temperature : -20°C to +50°C
S125LR
-
BZ
-
220
-
R
[Model
number]
[Buzzer] [Voltage] [Color]
| | | |
• S100LR
• S125LR
• (Blank)
- No buzzer type
• BZ
- Built-in buzzer type
• 12 - DC12V
• 24 - DC24V
• 110 - AC110V
• 220 - AC220V
R-Red
A-Amber
G-Green
B-Blue
Model
number
Voltage Current
Certi¿cate
Weight
Color
S100LR
DC12V 0.183A
-
0.39kg
R-Red
A-Amber
G-Green
B-Blue
DC24V 0.127A
AC110V 0.035A
0.47kg
AC220V 0.017A
S125LR
DC12V 0.422A
0.43kg
DC24V 0.266A
AC110V 0.082A
0.66kg
AC220V 0.041A
Ordering Specications Product Specications
Please scan the QR code
for more
detailed product information.
www.qlight.com
44
90dB
5020
Thank you for purchasing Qlight’s products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn o-• the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product’s speci¿cation.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, ¿re, and electric shock.
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. During wiring or maintenance, please completely turn o-• the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each�� product. (Failure to follow these instructions may cause a ¿re to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to ¿re, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to ¿re, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, ¿re, electric shock and loss of life.)
2
S125LRS100LR
12 152
9346
12 158
11348
Ø101
Ø119
Ø10 CABLE ENTRY
Ø10 CABLE ENTRY
PCD 60
PCD 85
360°/3-M4 BOLT
360°/3-M5 BOLT
• DC/AC type cable speci¿cation : External power line -
UL1015 AWG18(0.75sq) × 2C 400mm
• For built-in buzzer type, there is a shared supply line for the buzzer and lighting element.
•
AC compatible type shall be connected the black and white wires when us���ing AC110V, and the black and red wires when using AC220V.
Parts Denition/ Installation Mounting Hole Specications
• First, remove the ange nuts from bolts and place the
product through the mounting surface holes.
• Fasten the ange nuts on the opposite side of the
mounting surface until the product is tightened securely.
• Machine holes on the mounting surface referring to the
diagram below.
Lens(AS)
Housing(ABS)
LED unit
Rubber spacer
Flat washer
Flange nut
Reector
(Heat resistant ABS)
Dimensions
(Units : mm)
Wiring Instructions
PCD 60
3-Ø5 HOLES
PCD 85
3-Ø6 HOLES
Min. Ø5 CABLE ENTRYMin. Ø5 CABLE ENTRY
S100LR S125LR
Red
Black
White
Black
Red
White
Black
Power
Power
Power
Fuse Fuse Fuse
DC AC AC compatible type