HIGH PREFORMANCE & PROVEN RELIABILITY
SUPPORTED SYSTEMS & FREQUENCIES
At Carlisle Interconnect Technologies (CarlisleIT), we
understand how critical it is in today’s highly competitive
market for aircra manufacturers and operators to control
cost. Lightweight and high-performance are the keys to
reducing operational expenses. That is why CarlisleIT continues
to design and manufacture both standard RF cables/cable
assemblies and low PIM assemblies with design features that
maximize system integrity and minimize cost of ownership.
Cable Assemblies & Harnesses
Avionics RF Assemblies
Low Loss, Low Frequency RF Cable Assemblies
Le to Right: 310801 to N Plug, 311201 to TNC 90 Plug, 311501 to N Bulkhead Jack, 311601 to Size 1, 352001 to Modified Size 1, 3C058A to Size 5
BENEFITS
KEY FEATURES
»
Up to 75% lighter than Mil-C-17 standard cables
» Bend radii ranges between .75 – 2 inches
» -55° to 200° temperature range
» Multi-layered shielding provides superior protection
against EMI/RFI
» Minimal Insertion Loss
» Meets or exceeds FAR Part 25 Burn/Smoke requirements
» Product ID marker tape with identification every 3-4
inches.
» Low PIM assemblies made with non-ferromagnetic prop-
erties to reduce multi-frequency inference
» Easier to install (smaller, lighter, more flexible)
» Built to your specifications
» Just-in-time delivery
» Tested to meet system specifications and test data is
shipped with assembly
» Test data is retained for future orders
» Expert Termination
» HF / 2 - 30 (MHz)
» Marker Beacon / 75 (MHz)
» VOR / LOC/108 - 118 (MHz)
» VHF / 118 - 156 (MHz)
» Glide Slope / 329 - 335 (MHz)
» TCAS / 1030, 1090 (MHz)
» DME / 960 - 1220 (MHz)
» GPS / 1575 (MHz)
» SATCOM / 1559, 1660 (MHz)
» XM, Wi-Fi / 2200 - 2400 (MHz)
» Radar Altimeter / 4200 - 4400 (MHz)
» MLS / 5030 - 5091 (MHz)
» IFE - KU Band / 10.7 - 12.75 GHz
© Carlisle Interconnect Technologies, 2018. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved. SS-10165-120518
CONNECT WITH US TODAY
See CarlisleIT’s line of Cable Assemblies & Harnesses at: (+1) 904-494-0549
CarlisleIT.com/products/cable-assemblies-and-harnesses Sales@CarlisleIT.com
QUALITY ASSURANCE
Avionics RF Assemblies
Low Loss, Low Frequency RF Cable Assemblies
Each Avionics RF Cable assembly is tested on our network
analyzers to maintain high quality and ensure reliability.
Insertion Loss, Phase Matching, Time Delay and VSWR are
measured to verify performance and to meet your exact
assembly requirements.
RF Assembly electrical profiles are documented and
a certificate of compliance is included with each ship-
set. Profiles are archived in our database to ensure
repeatability. Individual, phase-matched cables can be
remanufactured rather than replacing an entire ship-set.
Heat Shrink Wrapping Termination Test & Measurement
Standard CarlisleIT
RF Cable Assemblies
CarlisleIT Standard Heavy Duty Connectors
are made from corrosion resistant materials
and seal out moisture.
Low PIM CarlisleIT
RF Cable Assemblies
CarlisleIT Low PIM Connectors are made
from non-ferromagnetic materials. They are
corrosion resistant and seal out moisture.
Standard RF and Low PIM Cable Assemblies
Oer Low Loss & Low VSWR Performance
Color Coded Heat Shrink Tubing Available
for Both Cable Assembly Types
Adhesive Heat Shrink Tubing
Protects against water ingression and
reduces strain.
Lightweight
Coaxial Cable
Product I.D.
Marker Tape