MLX90371EAC – Triaxis® Position Sensor
Datasheet
Features and Benefits
Hall Technology
Dual die, PCB-less package
On-Chip Signal Processing for Robust Absolute
Position Sensing
ISO26262
ASIL-B Safety Element out-of-Context
Programmable Measurement Range
Programmable Linear Transfer Characteristic
(Multi-points 4 or 8 points or Piece-Wise-
Linear 16 or 32 segments)
Analog (Ratiometric) Output
12 bit Resolution - 10 bit Thermal Accuracy
48 bit ID Number option
Application Examples
Absolute Rotary Position Sensor
Absolute Linear Position Sensor
Throttle Position Sensor
Steering Wheel Position Sensor
Valve Position Sensor
Non-Contacting Potentiometer
Description
The MLX90371 is a monolithic sensor sensitive to
the three components of the flux density applied
to the IC (i.e. B
X
, B
Y
and B
Z
). This allows the
MLX90371, with the correct magnetic design, to
decode the absolute position of any magnet
moving in its vicinity (e.g. rotary position from 0
to 360 Degrees or linear displacement).
The MLX90371GVD-EAC outputs a programmable
ratiometric analog output signal. The analog
output is compatible with any resistive
potentiometer or programmable linear Hall sensor
and is configurable through multi-point calibration
to tune the output to the desired motion and
improve accuracy.
Unique to this variant, compared to the other
MLX90371 products, is the dual die configuration
in the Single Mold Package (SMP) for PCB-less
integration. Configured with side-by-side
mounting of the dies, the Single Mold Package
provides independent outputs (1x per die) with
shared power and ground. The Single Mold
Package has been designed to provide improved
mounting and integration to a housing and
connector leadframe while reducing size
compared to previous PCB-less packages.