ABS2 THRU ABS10
· Glass passivated die construction
· Low forward voltage drop
· High current capability
· High surge current capability
·
Designed for surface mount application
·
Plastic material-UL flammability 94V-0
Mechanical Data
·
Case:ABS, molded plastic
·
Terminals: plated leads solderable per
MIL-STD-202, Method 208
·
Polarity: as marked on case
·
Mounting position: Any
·
Marking: type number
· Lead Free: For RoHS / Lead Free Version,
Maximum Ratings and Electrical Characteristics
Rating at 25℃ ambient temperature unless otherwise specified.
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
SYMBOL
ABS2 ABS4 ABS6 ABS8 ABS10
UNITS
Peak Repetitive Reverse Voltage
VRRM
Working Peak Reverse Voltage
V
RWM
200
400
600
800
1000 V
DC Blocking Voltage
VDC
RMS Reverse Voltage
V
RMS
140
280
420
560
700 V
Maximum average forward rectified current @ A=40
℃
I
O
1.0
A
T
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
I
FSM
35 A
(JEDEC Method)
Forward Voltage per element @IF=1.0A VFM
1.1
V
Peak Reverse Current
@ A =25 ℃
5.0
T
IR
100
uA
At Rated DC Blocking Voltage
@TA =125℃
Typical Junction Capacitance per leg (Note 1)
C
J
25
pF
Typical Thermal Resistance per leg (Note 2)
RθJA
80
℃
/W
RθJL
16
Operating and Storage Temperature Range TJ,TSTG -55to+150
℃
Note:1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2.Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B
with 0.5×0.5''(13×13mm)cop
ABS2 THRU ABS10