V13
1
︳
LDM100S SERIES
100 WATT SINGLE OUTPUT
AC-DC
LED DRIVER
Features
*
Universal Input 90~305Vac or 127-420Vdc
* High Efficiency up to 90%
* Meets EN55015, EN61000-3-2 Class C
* Meets LVD EN61347-1, EN61347-2-13
* Approval UL8750
* Active PFC Function
* IP67 Design for Indoor or Outdoor
Installations (note7)
* Max. Output power 100W
* Dimming Function: Digital (Optional)
* Protections: Short circuit, Over Current
Over Voltage and Over Temperature
* Constant Voltage and Constant Current
* No Load Power Consumption<0.5W (note10)
* 3 Years Warranty
LDM100 Series
MODEL
Output
Voltage
Output
Current
Note.6
Ripple
(mV p-p)
Note.1
Voltage
Accuracy
Note.2
Line
Regulation
Note.3
Load
Regulation
Note.4
Constant
Current
Region
Current
Adj. Rang
(Optional)
N
ote.
5
Voltage
Adj. Rang
(Optional)
Note.5
% EFF.
(typ.)
Note.8
LDM100S120
12V 8.34A
120mV
±1% ±1% ±2% 6.5V~12V
5.3A~8.34A
10.8V~13.2V
88%
LDM100S240
24V 4.17A
120mV
±1% ±1% ±2% 13V~24V
2.6A~4.17A
21.6V~26.4V
89%
LDM100S360
36V 2.78A
120mV
±1% ±1% ±2% 19V~36V
1.74A~2.78A
32.4V~39.6V
90%
LDM100S480
48V 2.08A
120mV
±1% ±1% ±2% 26V~48V
1.3A~2.08A
43.2V~52.8V
90%
Ordering information
Model No.
Optional Type
LDM100SXXX -XX
Optional type:
01: Constant Current Mode (IP67) 04: Constant Current Mode (IP67)
No dimming Dimming: Digital meets IEC62386 part 102,207 ver.1
No adjustment for output voltage and output current
No adjustment for output voltage and output current
02: Constant Current Mode (IP65) 04A: Constant Current Mode (IP65)
No dimming Dimming: Digital meets IEC62386 part 102,207 ver.1
With adjustment for output voltage and output current
With adjustment for output voltage and output current
Specifications are subject to change without notice
V13
2
Specifications
INPUT SPECIFICATIONS:
Derating curve:
0
25
50
75
100
-40 -30 -20 -10 0 10 20 30 40 50 60 70
Ambient Temperature(
o
C)
Rated Load(%)
20LFM(Natural Convection)
Voltage …....………........…......................... 90~305Vac or 127-420Vdc
Frequency ………………………………….........…………..... 47 to 63Hz
Inrush Current
……......
....
....
..…
75A max. @240Vac, Cold Start @25
℃
Conducted EMI ………………………..……....… CISPR/FCC Class B
Power Factor ……………………………….….……………...... PF> = 0.9
Leakage Current ……………...…………..…..… 0.75mA max. @277Vac
Input Current ………………………….. 1.1A typ. @110Vac, Pout=99W
0.55A typ. @230Vac, Pout=99W
OUTPUT SPECIFICATIONS:
Holdup Time ……...………………………………… 16ms typ. @115Vac
NOTE:
Short Circuit Protection …………..……... Hiccup Mode (Auto Recover)
1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output
Temperature Coefficient .……………............................ ±0.05%/
℃
max.
for ripple noise measuring @20MHz BW and 95% rated current.
Over Voltage Protection …………………….
TVS Component to Clamp
2. Voltage accuracy is set of 90% rated current.
Over Current Limit ………..….……….. Constant Current Mode (note9)
3. Line regulation is measured from high line to low line with 90%
Over Temperature Protection ……………...………….…….. 110
℃
typ.
rated current.
Altitude ……………………..………….…………………………… 2000m
4. Load regulation is measured from 90% to 10% rated current.
Startup Time ……………………………………………………. 0.5s
max.
5. Can be adjusted by internal potentiometer.
Rise Time ………………………………..…………………………50ms typ.
6. Output constant current accuracy ±5%.
MTBF….…....…. MIL-HDBK-217F, GB, at 25
℃
/115VAC…160Khrs typ.
7. IP67 for model: LDM100SXXX-01, LDM100SXXX-04
Life Time …………………..……… 40000 Hours min. @Full Load, 25
℃
IP65 for model: LDM100sXXX-02, LDM100SXXX-04A
Vibration …… 15~2000Hz 4G period for 60min, each along X Y Z axes
8. Efficiency is measured 95% rated power at Vin=230VAC.
SAFETY AND EMC:
9. Less than 50% typ. of the rated output voltage will enter hiccup mode.
Emission and Immunity ……..…………………….… EN55015, CISPR22
10. No load power consumption<0.5W for LDM100SXXX-01, -02
EN61547, EN61000-3-2, EN61000-3-3
No load power consumption<1.5W for LDM100SXXX-04, -04A
Surge …………………………………………………...………………. ±4kV
Stand by power consumption<0.5W for LDM100SXXX-04, -04A
Safety…. UL8750, LVD (EN 61347-2-13:2014+A1 :2017, EN 61347-1:2015)
Harmonic Current ………………….. EN61000-3-2 Class C (>60% Load)
GENERAL SPECIFICATIONS:
Isolation Voltage …………………………..…………….. I/P-O/P 3750Vac
Isolation Resistance ……………………….…..……………... 100MΩ min.
Oper
ating Temperature ............
..
.
..
..
....
-
40 ~ 70
℃
(
S
ee Derating Curve)
Storage Temperature ………………
…
...
……
...
.......……........
-
40~85
℃
Cooling …………………………………..…….…….. Natural Convection
MECHANICAL CHARACTERISTICS:
Dimensions ……........ 9.134x1.575x1.102 Inches (232.00x40.00x28.00 mm)
Weight …………………………….......………………………….. 504g typ.
Mechanical Specifi
cat
ion
ACL(Brown)
ACN(Blue)
FG (Green/Yellow)
All Dimensions in Inches(mm)
Tolerance Inches:x.xxx±0.02
Millimeters:x.xx±0.5
2
Vo+(Red) 16AWG
Vo-(Black) 16AWG
SJTW
SJTW 18AWG(0.75mm )x3C
TC
＊
TC: Max Case Temperature
Typical at 25˚C, nominal line and 75% load, unless otherwise Specified