● Non-polarized series with 5mm height
● Designed for use in circuits with reversing polarity
● Load life of 1000 hours at 105℃
● Solvent-proof
● Rohs compliance.
■ SPECIFICATIONS
I = 0.03CV or 3(μA) whichever is greater.(after 5 min.)
where,I: Max Leakage Current(μA), C: Nominal Capacitance(μF), V: Rated Voltage(V) (at 20℃)
WV 6.3 10 16 25 35 50
tanδ 0.24 0.20 0.17 0.17 0.15 0.15
6.3 10 16 25 35 50
432222
864433
105℃ 1,000 hours, at rated voltage, during which the polarity of DC voltage is reversed for each 500 hours,
After storage for 500 hours at 105℃ with no voltage applied, voltage treatment of JIS-C-5102 article 4-4 is to be
given and then measurement shall be made, at which time requirements specified in the table "High temperature
loading" can be met.
●DRAWING
Unit :mm
ΦD 4 5 6.3 8
P 1.5 2.0 2.5 3.5
Φd 0.45 0.45 0.45 0.45
β
◆ PART NUMBERING SYSTEM
High Temp. Non-Load Test
Dissipation Factor (tanδ)
Stability at 120Hz
High Temp. Load Test
Low Temp. Impedance
( at 120Hz, +20℃ )
Nominal Cap. Range
Capacitance Tolerance
- 20% ~ + 20% (at 20℃, 120Hz)
0.1 ~47 μF
Z( - 40℃ ) / Z ( + 20℃ )
Z( - 25℃ ) / Z ( + 20℃ )
W. V .
Item
perating Temperature Rang
Voltage Range
Characteristics
- 40 ~ +105℃
6.3 ~50 V.DC
Aluminum Electrolytic Capacitors
NS Series
1.0
Note : Some cleaning solvents may adversely affect the capacitors . Consult us about the suitable type of cleaning solvents to be used.
Capacitance change … ≦±20% of the initial measured value
Tan δ …≦200% of the initial specified value
DC leakage current …≦ the initial specified value
the capacitor shall meet the following limits:
Leakage Current