●Wide temperature range -55~+105℃
●Load life of 3000~5000 hours
●Comply with the RoHS directive
■ SPECIFICATIONS
6.3 16 25 35
0.28 0.20 0.16 0.13
0.38 0.30 0.26 0.22
Measurement frequency:120Hz
6.3 10 16 25 35 50
Z( - 25℃ ) / Z ( + 20℃ )
3 3 2 2 2 2
Z( - 55℃ ) / Z ( + 20℃ )
8 5 4 3 3 3
Z( - 25℃ ) / Z ( + 20℃ )
5 4 3 2 2 2
Z( - 55℃ ) / Z ( + 20℃ )
12 10 8 5 4 3
Within ±30% of initial value
300% or less of initial specified value
initial specified value or less
After reflow soldering and restored at room temperature, they meet the characteristics listed below.
Within ±10% of initial value
initial specified value or less
initial specified value or less
Black print on the case top.
Rated Voltage (V) 10
Stability at Low Temperature
Leakage Current
Dissipation Factor
Leakage Current
Dissipation Factor(tanδ)
tan δ(max.)
Impedance Ratio
ZT/Z20(max.)
Φ4~Φ10
Φ12.5~Φ16
Measurement frequency:120Hz ,Temperature:20℃
Leakage Current
Marking
Resistance to Soldering Heat
Load Life
Shelf Life
After leaving capacitors under no load at 105℃ for 1000 hours,they meet the specified value for load life characteristics listed above.
Leakage current(Φ4~Φ10) ≤0.01CV or 3uA,whichever is greater (after 2 minutes application of rated voltage)
Leakage current(Φ12.5~Φ16) ≤0.03CV or 4uA,whichever is greater (after 1 minute application of rated voltage)
Capacitance Change
Dissipation Factor
Φ12.5~Φ16 0.34
0.18
Rated Voltage (V)
After 5000 hrs.(3000 hrs.forΦ4~Φ6.3×5.4&Φ8×6.2) application of the rated voltage at 105°C, they meet the characteristics listed
below.
Capacitance Change
Voltage Range 6.3 ~ 100 V
50~100
Φ4~Φ10 0.24 0.12
Capacitance Range
0.1 ~ 1500μF
Capacitance Tolerance
- 20% ~ + 20% at 20℃, 120Hz
Operating Temperature Range
-55 ~ +105℃
KL Series
Aluminum Electrolytic Capacitors
5000 HOURS LONG LIFE ASSURAN
C
Item Characteristics
KL Series
●DIMENSIONS(Unit:mm)
(ΦDxL) 4×5.4 5×5.4 6.3×5.4 6.3×7.7 8×6.2 8×10.5 10×10.5 10×13.5 12.5×13.5 12.5×16 16×16.5
A 1.8 2.1 2.4 2.4 3.3 2.9 3.2 3.2 4.7 4.7 5.5
B 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 13.0 13.0 17.0
C 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 13.0 13.0 17.0
E±0.2 1.0 1.3 2.2 2.2 3.1 3.1 4.4 4.4 4.4 4.4 6.7
L 5.4 5.4 5.4 7.7 6.2 10.5 10.5 13.5 13.5 16.0 16.5
■DIMENSIONS & MAXIMUM PERMISSIBLE RIPPLE CURRENT &IMPEDANCE
10 100 18 27
22 220 22 5×5.8 30 30 44
33 330 5×5.8 35 5×5.8
360
(315)
48 50
47 470 5×5.8 38 6.3×5.8 50 50 63
100 101 6.3×5.8 69
6.3×7.7
(8×6.2)
81 81 116
150 151
6.3×7.7
(8×6.2)
85 8×10.5 125 125 320
220 221
6.3×7.7
(8×6.2)
120 8×10.5 141 216 320
330 331 8×10.5 290 10×10.5 290 290 320
470 471 10×10.5 320 10×10.5 320 320
400
(350)
680 681 10×10.5 320 10×10.5 320 420 415
1000 102 10×10.5 410 10×13.5 390 550 460
1500 152 10×13.5 450 12.5×13.5 480 650 700
2200 222 12.5×13.5 680
12.5×16
(12.5×13.5)
750
(510)
800
3300 332
12.5×16
(12.5×13.5)
850
(800)
16×16.5 800
Rated Ripple Current (mArms) at 105℃ 120Hz
Case Size: ΦDxL (mm)
16×16.5
12.5×13.5 12.5×16
10×13.5 12.5×13.5
12.5×13.5 12.5×13.5
10×10.5 10×10.5
10×10.5
12.5×13.5
(10×13.5)
8×10.5 10×10.5
10×10.5 10×10.5
6.3×5.8
6.3×7.7
(8×6.2)
6.3×7.7
(8×6.2)
8×10.5
5×5.8 6.3×5.8
6.3×5.8 6.3×5.8
Aluminum Electrolytic Capacitors
WV(Vdc)
6.3 10 16 25
μF
4×5.8 5×5.8