●Operating with wide temperature range - 40 ~ +85℃
●Load life of 2000 hours
●Comply with the RoHS directive
■ SPECIFICATIONS
Measurement frequency:120Hz ,Temperature:20℃
4 6.3 10 16 25 35 50 63 100
0.35 0.26 0.20 0.16 0.14 0.12 0.12 0.10 0.10
0.42 0.38 0.34 0.30 0.26 0.22 0.18 0.14 0.10
Measurement frequency:120Hz
4 6.3 10 16 25 35
Z( - 25℃ ) / Z ( + 20℃ 7432
2 2
Z( - 40℃ ) / Z ( + 20℃ ) 1586443
Z( - 25℃ ) / Z ( + 20℃ 754322
Z( - 40℃ ) / Z ( + 20℃ )171210 8 5 4
Within ±20% of initial value (Within ±30% of initial value for 4V)
200% or less of initial specified value
initial specified value or less
After leaving capacitors under no load at 85°C for 1000 hours, they meet the specified value for load life characteristics listed above.
After reflow soldering and restored at room temperature, they meet the characteristics listed below.
Within ±10% of initial value
initial specified value or less
initial specified value or less
Black print on the case top.
Aluminum Electrolytic Capacitors
Capacitance Tolerance
- 20% ~ + 20% (at 20℃, 120Hz)
Item Characteristics
Operating Temperature Range
- 40 ~ +85℃
Voltage Range 4 ~ 100 V.DC
Nominal Cap. Range
0.1 ~ 6800 μF
( at 120Hz, +20℃ )
tanδ
Φ4~Φ10
Φ12.5~Φ16
Leakage Current
Leakage current (Φ4~Φ10)≤0.01CV or 3uA,whichever is greater (after 2 minutes application of rated voltage)
Leakage current (Φ12.5~Φ16)≤0.03CV or 4uA,whichever is greater (after 1 minute application of rated vol
t
Dissipation Factor (tanδ)
Rated Voltage (V)
Stability at Low Temperature
Rated Voltage (V)
Impedance Ratio Φ4~Φ10
ZT/Z20 (max.)
Φ12.5~Φ16
Dissipation Factor
Leakage Current
Load Life
Capacitance Change
Dissipation Factor
Leakage Current
After 2000 hours application of the rated voltage at 85°C, they meet the characteristics listed below. at85°C.
CS Series
Marking
50~100
2
3
2
3
Shelf Life
Resistance to Soldering Heat
Capacitance Change
CS Series
●DIMENSIONS(Unit:mm)
size(ΦDxL) 4×5.4 5×5.4 6.3×5.4 6.3×7.7 8×6.2 8×10.5 10×10.5 10×13.5 12.5×13.5 12.5×16 16×16.5
A 1.8 2.1 2.4 2.4 3.3 2.9 3.2 3.2 4.7 4.7 5.5
B 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 13.0 13.0 17.0
C 4.3 5.3 6.6 6.6 8.3 8.3 10.3 10.3 13.0 13.0 17.0
E±0.2 1.0 1.3 2.2 2.2 2.2 3.1 4.4 4.4 4.4 4.4 6.7
L 5.4 5.4 5.4 7.7 6.2 10.5 10.5 13.5 13.5 16.0 16.5
■DIMENSIONS ￡MAXIMUM PERMISSIBLE RIPPLE CURRENT
4X5.4 19
4X5.4 25
5X5.4
(4X5.4)
28
(20)
4X5.4 28 5X5.4 34
4X5.4 31
5X5.4
(4X5.4)
35
(28)
5X5.4
(4X5.4)
39
(28)
6.3X5.4
(5X5.4)
52
(35)
4X5.4 26
5X5.4
(4X5.4)
39
(31)
5X5.4
(4X5.4)
43
(32)
6.3X5.4
(5X5.4)
57
(40)
6.3X5.4
(5X5.4)
63
(42)
4X5.4 34
5X5.4
(4X5.4)
47
(36)
6.3X5.4
(5X5.4)
59
(43)
6.3X5.4
(5X5.4)
68
(44)
6.3X5.4 68
4X5.4 39 5X5.4 46 6.3X5.4 57 6.3X5.4
74
6.3X5.4 82
5X5.4 45
6.3X5.4
(5X5.4)
62
(52)
6.3X5.4 72 6.3X5.4 80 6.3X5.4 94
5X5.4 61
6.3X5.4
(5X5.4)
71
(55)
6.3X5.4 76
6.3X5.4
(8X6.2)
86
(200)
6.3X7.7
(8X6.2)
130
(91)
6.3X5.4 74 6.3X5.4 78 6.3X5.4 88 6.3X7.7 135
8X10.5
(6.3X7.7)
200
(130)
6.3X5.4 82 6.3X5.4 95
6.3X7.7
(8X6.2)
150
(250)
8X10.5
(6.3X7.7)
(8X6.2)
215
(150)
(135)
8X10.5 250
6.3X7.7 150
6.3X7.7
(8X6.2)
150
(300)
8X10.5 280 8X10.5 280
10X10.5
(8X10.5)
340
(310)
6.3X7.7 150
8X10.5
(6.3X7.7)
300
(150)
10X10.5
(8X10.5)
320
(300)
10X10.5
(8X10.5)
420
(330)
10X10.5 400
8X10.5 300 8X10.5 300 10X10.5 380 10X10.5 450 10X13.5 550
8X10.5 330
10X10.5
(8X10.5)
430
(330)
10X10.5 450
12.5X13.5
(10X13.5)
(10X10.5)
710
(550)
(490)
12.5X13.5 820
10X10.5 450
10X13.5
(10X10.5)
650
(450)
10X13.5 650 12.5X13.5 750 12.5X16 1000
10X13.5
(10X10.5)
620
(480)
12.5X13.5
(10X13.5)
890
(720)
12.5X13.5 960
16X16.5
(12.5X16)
1150
(1000)
16X16.5 1250
10X13.5 700
12.5X16
(12.5X13.5)
1000
(900)
16X16.5
(12.5X16)
1300
(1050)
16X16.5 1350
12.5X13.5 850 16X16.5 1400 16X16.5 1450
16X16.5
(12.5X16)
1350
(900)
Rated Ripple Current (mArms) at 85℃ 120Hz
Case Size: ΦDxL (mm)
330
150
47
56
68
Aluminum Electrolytic Capacitors
4.7
10
WV(Vdc)
μF
4700
6800
470
680
1000
1500
2200
3300
25
220
15
22
33
100
4 6.3 10 16