Bihl+Wiedemann Suites

Bihl+Wiedemann GmbH · Floßwörthstr. 41 · D-68199 Mannheim · Tel.: 0621/33996-0 · Fax: 0621/3392239 · eMail: mail@bihl-wiedemann.de

www.bihl-wiedemann.de Angaben ohne Gewähr Mannheim, 7.6.21 Seite 1

Bihl+Wiedemann Suites – Safety Software for

Configuration, Diagnosis and Commissioning

ASIMON360 enables simple and intuitive hardware configuration, ad-

dressing, configuration and commissioning of secure ASi networks.

The software can be used to carry out simple live diagnostics on de-

vices configured and detected in the ASi circuit using the integrated

ASi Control Tools360.

The Bihl+Wiedemann software ASi Control Tools360 simplifies the ad-

dressing, configuration and commissioning of standard hardware. ASi

Control Tools360 are suitable for performing live diagnostics of config-

ured and detected devices in the ASi circuit. The software can be used

for configuration, programming as well as for ASi diagnostics of ASi

masters and ASi gateways.

The diagnostic software quickly detects and describes faults in stan-

dard ASi networks and in ASi safety networks. The user-friendly diag-

nostic software is mainly used for commissioning and maintenance

intervals and provides concrete error information and direct sugges-

tions for solutions. The information and solutions are clearly present-

ed in the software mask and provide even inexperienced ASi users

with direct "help for self-help" in the event of errors occurring during

the test.

Figure Type Diagnostics

software

(1)

Diagnostic Software

Software to perform a release measurement or independent troubleshooting and preventative diagnostics on a system

ASIMON360

(2)

ASIMON360

Software to configure safe hardware, to create a safety configuration and to put it into operation.

ASIMON360

simulation

(3)

ASIMON360 Simulation

Software to test an existing ASIMON360 configuration on simulated hardware.

ASi Control Tools

(4)

ASi Control Tools360

Software for addressing, configuring and implementing of non-safety hardware and for simple live diagnostics of planned and detected

devices in the ASi network. ASi Control Tools360 software as stand alone versio

Cable Article no

Bihl+Wiedemann

Safety Suite

yes

yes yes yes no BW2916

Bihl+Wiedemann

Safety Suite

yes

yes,

service version only

yes

yes no BW3065

Bihl+Wiedemann

Suite

yes

no no yes no BW2902

Bihl+Wiedemann Suites

Bihl+Wiedemann GmbH · Floßwörthstr. 41 · D-68199 Mannheim · Tel.: 0621/33996-0 · Fax: 0621/3392239 · eMail: mail@bihl-wiedemann.de

Seite 2 Mannheim, 7.6.21 Angaben ohne Gewähr www.bihl-wiedemann.de

Accessories:

• USB connector for Safety Basic Monitor (art. no.BW2530)

• Serial cable for ASi Gateways and ASi Monitors in Stainless Steel (art no. BW1575)

• USB - RS 232 interface converter (art. no. BW2274)

• Cross-Link-cable for ASi Ethernet Gateway (art. no. BW1304)

• Interface cable for connection od Safety Monitors (BW1764 and BW1765) to the PC (art. no.BW1771)

• Serial Cable for ASi Scanner (art. no. BW1417)

Article no. BW2916 BW3065 BW2902

General data

Name Bihl+Wiedemann Safety Suite -

Safety Software for Configuration,

Diagnostics and Commissioning

Bihl+Wiedemann Safety Suite -

Safety Software for Configuration,

Diagnostics and Commissioning

(Service Version)

Bihl+Wiedemann Suite - Software

for Configuration, Diagnostics and

Commissioning

Installation

Range of functions ASIMON360: for configuring safety

or non-safety hardware, creating a

safety configuration and for ad-

dressing projecting and imple-

menting hardware, for simple live

diagnostics of planned and detect-

ed devices in the ASi network with

the help of the integrated ASi Con-

trol Tools360 software.

ASIMON360 (Service Version): for

online view of a safety configura-

tion and for addressing projecting

and implementing hardware, for

simple live diagnostics of planned

and detected devices in the ASi

network with the help of the inte-

grated ASi Control Tools360 soft-

ware.

ASi Control Tools360 : all functions of ASi Control Tools360 software

are integrated directly into the ASIMON360.

ASi Control Tools360: For address-

ing, configuring and implementing

of non-safety hardware and for

simple live diagnostics of planned

and detected devices in the ASi

network.

Safety monitor simulator : for testing an existing ASIMON360 configu-

ration on simulated hardware.

Diagnostics software: for release measurement on a system and for autonomous diagnostics and preven-

tive troubleshooting.

Configuration translator : for exporting and changing the identifier of de-

vices and the configuration titles from a configuration created with ASI-

MON360 or of a working range.

Installation options full version service version - software with lim-

ited features only for viewing and

downloading existing

configurations

full version

standard installation (single-user-license) or virtual machine (floating license)

System requirements

Software requirements Windows Vista / Windows 7 / Windows 8 / Windows 8.1 /

Win10 (from software package version 3.1.883.240)

Windows .NET Framework 4.0

Hardware requirements a Pentium®- or faster Intel®-processor (or compatible models, such as AMD® or Cyrix®)

at least 500MB of free fixed disk storage

at least 256MB main memory (RAM)

a mouse (recommended) or touchscreen

ASi Safety Monitor -

Compatibility 32bit and 64bit systems

Supported interfaces RS232

USB

Ethernet (UDP)

Documentation

software manuals

example programs

Tutorials

to support the first local program you’ll find Quick Start Guides and video tutorials in the donwload section

of the article on our website