Shenzhen Orient Components Co ., Ltd
Copyright© 2020 Orient .All rights Reserved
1. Features
(1)
Current transfer ratio ( CTR : MIN. 300% at I
F
= 5mA, V
CE
= 5V )
(2)
High input-output isolation voltage ( Viso = 5,000Vrms )
(3)
Response time ( tr : TYP. 2.9 µs at V
CE
= 10V, I
C
= 2mA, R
L
= 100Ω)
(4)
In compliance with RoHS, REACH standards
(5)
ESD pass HBM 8000V/MM 2000V
(6)
MSL Class Ⅰ
(7)
Safety approval
UL approved (No.E323844)
VDE approved (No.40029733)
CQC approved (No.CQC09001029446)
CE approved (No.AC/0431008)
State Grid approved (No.SGCM013420170152 )
2.Description
(1)
ORPC-817SC-H photocoupler consist of one piece of GaAs emitter and one piece of
NPN transistor.
(2)
They are packaged in a 4-pin DIP & SMD package .
3.Applications
(1)
Switching power supply (2) Ammeter (3)Computer
(4)
Instrumental application, measurement machine
(5)
Imbursement equipments, duplicating machine, automat
(6)
Family-use electric equipments, such as fans
(7)
Signal transforming systems
4.Absolute Maximum Ratings at Ta=25℃
Peak forward current (100μs
pulse, 100Hz frequency)
Collector and emitter Voltage
Emitter and collector Voltage
Max Insulation Voltage (Insulating oil test)
Rated Impulse Insulation Voltage
*1.AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)
Short between anode and cathode on the primary side and between collector and emitter on the secondary
side.
(2)
The isolation voltage tester with zero-cross circuit shall be used.
(3)
The waveform of applied voltage shall be a sine wave.
*2. Soldering time is 10 seconds