Keep pipes from freezing
Protection anti-gel des tuyaux
Residential Pipe Freeze Protection System
Système résidentiel de protection anti-gel
NVENT RAYCHEM FROSTEX PIPE FREEZE PROTECTION SYSTEM USING THE
9800 FLEXFIT PLUG KIT INSTALLATION INSTRUCTIONS AND USER GUIDE
DIRECTIVES D’INSTALLATION ET GUIDE DE L’UTILISATEUR DU SYSTÈME NVENT
RAYCHEM FROSTEX DE PROTECTION ANTI-GEL DES TUYAUX UTILISANT LA
TROUSSE DE FICHE 9800 FLEXFIT
APPROVALS
-G
60J9 Residential and
Mobile Home Pipe
Heating Cable
60J9 Installation résidentielle
et maison-mobile câble chauffant
pour tuyaux d’eau
FROSTEX
2 | nVent.com
ENGLISH
Before You Begin
Make sure your nVent RAYCHEM Frostex 9800
FlexFit Plug Kit is complete. It should contain:
1 9800 FlexFit plug
1 Push-on end seal
2 Orange warning labels
1 Installation instruction
Make sure you have sufficient braided Frostex
heating cable for the job. Do not use earlier
versions of Frostex heating cable that have no
braid. Also make sure you have the following
items:
*Frostex 9610 application tape is
recommended.
Two 10-in (25 cm) plastic cable ties (not
included) may be used to secure ground-fault
unit to pipe insulation.
If you have any questions after reading this
guide, call this toll-free nVent number:
(800) 545-6258.
Save this installation instruction and user
guide. It contains important safety warnings
and maintenance information.
Wire cutters
#2 Phillips
screwdriver
1/2 in–1 in
(13 mm–25 mm)
tape*
9800 FlexFit plug
Reset button
Test button
Ground
fault unit
Indicator
light
TEST
Gel-filled
end seal
Contents
Five Important Safety Warnings .................... 3
General Instructions ......................................... 3
Installation Instructions .................................. 3
Cable Length Selection Tables ..................... 4
Periodic Inspections ........................................ 9
Troubleshooting ................................................ 9
Limited Warranty ........................................... 10