COMPONENTS PRODUCT INFORMATION
CONNECTOR
NEW
MB-0216-1
September 2010
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
1/5
Features
General Specifications
MX47 Series
Compact Waterproof Automotive Connectors
•No. of Contacts: 39 pos.
(Different keying available)
•Contact Resistance:
5m ohm max. (initial)
10m ohm max. (after test)
•Rated Current: 3A
•Connector Insertion Force: 100 N max.
•Waterproof: 98 kPa min. (initial)
•Vibration Resistance:
20G (50 to 1000Hz) each pole / 9 hours
•Applicable Cable: AVSS 0.3 to 1.25sq
•Operating Temperature:
-40 Deg. C to +125 Deg. C
JAE has developed the MX47 Series compact, high-density waterproof connector for
automotive applications.
The MX47 Series utilizes a structure similar to the existing MX23A Series waterproof
connector, but is more compact while maintaining a low height.
The applicable cable and performance is equivalent or higher than the MX23A, there is a
guide key for secure mating, and pin terminals have Pb-free compliant complete plating.
Superior vibration resistance makes the connector ideally suited for use in harsh
environments such as the engine areas of both 2 and 4-wheeled vehicles.
•2.5mm horizontal pitch, 3.6mm vertical pitch, 3 row board to wire connector.
•39 position, different keying available.
•Guide key for secure mating.
•Dowels on both side of connector for light press-fit to board for temporary holding.
•Socket terminal is a compact box type which is strong against external force.
•Retainer is a simple structure front cap type which is easy to attach.
•Pin terminal press-fit structure to prevent leakage of potting material.
•Slim type pin terminal with 0.5mm thickness and 1.0mm width.
RoHS Compliant
MB-0216-1
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
2/5
■Socket Connector
Front Cap
Socket Term inal
■ Pin Connector
Pin Terminal 1
Pin Terminal 2
Pin Terminal 3
Pin Housing
Compone nt M ater ial / Fini sh
Socket Housi ng 30%G F PBT
Seal Ring Silicone Rubber
Grommet Silicone Rubber
Rear Cover 30%G F PBT
Fr ont Cap 30%G F PBT
Socket Ter mi nal Brass / Ti n pl at i ng
Grommet
Socket Housing
Seal Ring
Front Cap
Rear Cover
Compone nt M ater ial / Fini sh
Pi n Housi ng 30% G F PBT
Pin Terminal 1, 2, 3 Brass / Tin plating
Socket Terminal
Structure, Materials and Finishes