Wall-Mount Racks 19-in. Wall-Mount Cabinets, RaCks and Panels
nVent.com/HOFFMANSUBJECT TO CHANGE WITHOUT NOTICEnetWoRking1
Spec-01011 H
Spec-01011
VeRsaRack
inDustRY stanDaRDs
UL 2416 Listed; File Number E230874
Rated to 100 lbs. with a 4X safety factor
EIA 310-D
aPPlication
VERSARACK is used for wall mounting and securing 19-inch rack
equipment for Telecommunication Rooms and other locations.
The rack provides for either left or right hinging to accommodate
a variety of applications. These open frame racks are ideal for
high-density cabling application. VERSARACK is ideal for IDFs
(Intermediate Distribution Frames), remote 19-inch rack equipment,
building automation, security and many other applications.
FeatuRes
• Designed to accommodate all standard 19-inch rack equipment
• Easy, single-tool assembly reduces installation time and cost
• Spring-load pivot pins provide for either left or right hinging; pins
can be arranged in unlocked or locked position
• Preassembled for fast, time-saving installation
• Temporary mounting bracket allows for rapid, single-person wall
installation
• UL double lug ground holes provide easy adherence to local
bonding and grounding codes
• Cable tie down points, sized for up to 1-inch Velcro
®
straps,
provided in horizontal and vertical positions in multiple locations
• Standard 12- or 24-inch deep offering to accommodate various
applications
• Open design provides for maximum access to cables and
equipment
• 19-inch rack fasteners (Phillips head, pilot point, black) 12-24,
quantity 20, included with rack
• Smart packaging with hand-carrying holes allows for easy
transportation
sPeciFications
• Wall section made of heavy gauge, cold rolled steel construction
• Welded pivoting rack section constructed of steel
• Tapped 12-24 holes per EIA Universal pattern standards (1/4-5/8-
5/8-1/4)
FinisH
• Pretreated steel coated with RAL 9005 black textured, low-gloss
polyester powder paint
• Hardware is clear or plated black
• Rack 12-24 fasteners plated black
loaD Rating
Static working load rating is 150 lbs. for all sizes
accessoRies
Vertical Cable Managers
D-Ring Cable Manager
Blanking Panels
Grounding kits
PDUs
Shelves
Bulletin: DOFRW
Standard Product
Catalog Number
AxBxC in./mm
F
in./mm
G
in./mm Rack Units
Vertical Cable Manager Accessory
E19SWM12U12 27.80 x 20.91 x 12.28
706 x 531 x 312
9.24
235
22.30
566
12 E19C12U
E19SWM12U24 27.80 x 20.91 x 24.29
706 x 531 x 617
21.24
540
22.30
22.30
12 E19C12U
E19SWM20U12 41.81 x 20.91 x 12.28
1062 x 531 x 312
9.24
235
36.31
922
20 E19C20U
E19SWM20U24 41.81 x 20.91 x 24.29
1062 x 531 x 617
21.24
540
36.31
922
20 E19C20U
E19SWM25U12 50.59 x 20.91 x 12.28
1285 x 531 x 312
9.24
235
45.09
1145
25 E19C25U
E19SWM25U24 50.59 x 20.91 x 24.29
1285 x 531 x 617
21.24
540
45.09
1145
25 E19C25U
Wall-Mount Racks 19-in. Wall-Mount Cabinets, RaCks and Panels
PH 763.422.2211nVent.com/HOFFMAN netWoRking 2
Spec-01011 H
$
%
7<3
7$33('
&
)
*
;
VeRsaRack VeRtical cable ManageR
VERSARACK offers a complimentary vertical cable manager that
easily attaches to the right or left side of Swing-Out Rack. Each
accessory includes one fully-assembled manager with retaining
hardware and installation instructions. One or two can be attached
to fit the application. The manager is made of formed steel with
composite support fingers. The vertical cable managers provides
for easy and convenient cable management for high-density
applications.
Bulletin: DOFRW
$
&
%
Standard Product
Catalog Number
AxBxC in./mm
Use With
E19C12U 19.69 x 4.13 x 8.19
500 x 105 x 208
E19SWM12U12 or E19SWM12U24
E19C20U 28.66 x 4.13 x 8.19
728 x 105 x 208
E19SWM20U12 or E19SWM20U24
E19C25U 40.51 x 4.13 x 8.19
1029 x 105 x 208
E19SWM25U12 or E19SWM25U24
VeRsaRack HaRDWaRe kit
Kit consists of (8) 1/4-20x.625 hex head cap screws; (4) grounding
lock washers; (1) mounting bracket; (20) 12-24x.625 pilot point
screws; and installation instructions.
Bulletin: DOFRW
Standard Product
Catalog Number Description
EVKIT VERSARACK hardware kit