TEDS
TEDS
TEDS-I0
TEDS-GND
S BRÖCKSKES GmbH & Co. KG | Grefrather Straße 204 - 212 b | 41749 Viersen | GERMANY
Phone: +49/2162/898-0 | Fax: +49/2162/898-101 | www.sab-worldwide.com | info@sab-broeckskes.de
cable screen
connected
with housing
by screw terminal
selection table
connection side 1
❏ Lemo type:
____________
❏ ODU type: ____________
❏ Fischer type: ____________
❏ SUB-D plug connector _____ pins
❏ SUB-D female connector _____ terminals
cable typ
(125°C temperature resistant measuring cable 2.500h)
❏ 6 x 28 AWG L3833-9284
❏ 8 x 28 AWG L3833-9301
❏ other dimension are possible on request
cable length
❏ 1 m
❏ 3 m
❏ 5 m
❏ other lengths are possible on request
connection side 2
❏ Lemo type: ____________
❏ ODU type: ____________
❏ Fischer type: ____________
❏ SUB-D plug connector _____ pins
❏ SUB-D female connector _____ terminals
❏ open end
core
SUB-D plug connector
grey pin 1
white pin 2
yellow pin 3
pin 4
pin 5
green pin 6
brown pin 7
rose pin 8
pin 9
screen housing
example/pin assignment
side 2
identification sleeve
(customer and manufacturer identification)
side 1
Within the range of sensors and measuring technique intelligent sensors are frequently used.
TEDS Transducer Electronic Data Sheet is an electronic memory element on which identification data of the
connected sensors are recorded.
Wherever space is limited or retrofitting required, TEDS components can be added to the connection technique.
Here B Bröckskes has the possibility to integrate TEDS components into the different standard connection
types of measuring technique (for example SUB-D, Lemo, ODU connectors).
In order to guarantee the correct fitting of the TEDS, the function of the components is controlled during the pro-
duction process. Identification data can be directly written on it on request.
TEDS COMPONENTS
IN MEASURING CABLES
Please inform us about the required pin assignment.