IECEx Certificate
of Conformity
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification System for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
Certificate No.: IECEx BVS 19.0060
Status: Current
Date of Issue: 2019-11-14
Applicant: Hans Turck GmbH & Co. KG
Witzlebenstr. 7
45472 Mülheim/Ruhr
Germany
Equipment: Ethernet-Gateway type GEN-3G
Optional accessory:
Type of Protection: Intrinsic Safety "i", Increased Safety "e"
Marking:
Page 1 of 3
Issue No: 0
Certificate history:
Ex ec ib [ib Gb] IIC T4 Gc
1.
2.
3.
Approved for issue on behalf of the IECEx
Certification Body:
Position:
Signature:
(for printed version)
Date:
This certificate and schedule may only be reproduced in full.
This certificate is not transferable and remains the property of the issuing body.
The Status and authenticity of this certificate may be verified by visiting www.iecex.com or use of this QR Code.
Certificate issued by:
DEKRA Testing and Certification GmbH
Certification Body
Dinnendahlstrasse 9
44809 Bochum
Germany
Dr Franz Eickhoff
Deputy Head of Certification Body
IECEx Certificate
of Conformity
Certificate No.: IECEx BVS 19.0060
Date of issue: 2019-11-14
Page 2 of 3
Issue No: 0
Manufacturer: Hans Turck GmbH & Co. KG
Witzlebenstr. 7
45472 Mülheim/Ruhr
Germany
Additional
manufacturing
locations:
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with
the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was
assessed and found to comply with the IECEx Quality system requirements.This certificate is granted subject to the conditions as set out in
IECEx Scheme Rules, IECEx 02 and Operational Documents as amended
STANDARDS :
The equipment and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found
to comply with the following standards
IEC 60079-0:2017
Edition:7.0
Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-11:2011
Edition:6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-7:2017
Edition:5.1
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
This Certificate does not indicate compliance with safety and performance requirements
other than those expressly included in the Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in:
Test Report:
Quality Assessment Report:
DE/BVS/ExTR19.0063/00
DE/PTB/QAR06.0013/05