MBR10150CT – MBR10200CT(LS)
Document number: DS44378 Rev. 6 - 2
1 of 4
www.diodes.com
December 2021
© Diodes Incorporated
MBR10150CT – MBR10200CT(LS)
SCHOTTKY BARRIER RECTIFIERS
REVERSE VOLTAGE – 150 to 200 Volts
FORWARD CURRENT – 10 Amperes
FEATURES
• Metal of silicon rectifier, majority carrier conduction
• Guard ring for transient protection
• Low power loss, high efficiency
• High current capability, low V
F
• High surge capacity
• Plastic package has UL flammability classification 94V-0
• IEC 61000-4-2, level 4 (ESD), >15KV (air)
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
MECHANICAL DATA
• Package: TO-220AB molded plastic
• Polarity: AS marked on the body
• Weight: 0.08 ounces, 2.24 grams
• Mounting position: Any
• Max. mounting torque = 0.5N.m (5.1Kgf.cm)
TO-220AB
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
CHARACTERISTICS
SYMBOL
MBR10150CT
MBR10200CT
UNIT
Maximum Recurrent Peak Reverse Voltage
V
RRM
150
200
V
Maximum RMS Voltage
V
RMS
105
140
V
Maximum DC Blocking Voltage
V
DC
150
200
V
Maximum Average Forward
Rectified Current (See Fig.1)
@T
C
=105°C
I
(AV)
10
A
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Superimposed on Rated Load
I
FSM
120
A
Voltage Rate of Change (Rated V
R
)
dv/dt
10000
V/us
Maximum Forward
Voltage (Note 4)
I
F
=5A
I
F
=5A
I
F
=10A
I
F
=10A
@ T
J
=25°C
@ T
J
=125°C
@ T
J
=25°C
@ T
J
=125°C
V
F
0.92
0.75
1.00
0.85
V
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@ T
J
=25°C
@ T
J
=125°C
I
R
8
2
uA
mA
Typical Thermal Resistance (Note 5)
R
θJC
3.0
°C/W
Typical Junction Capacitance
per Element (Note 6)
C
J
300
pF
Operating Temperature Range
T
J
-65 to +175
°C
Storage Temperature Range
T
STG
-65 to +175
°C
Notes:
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony
compounds.
4. 300us pulse width, 2% duty cycle.
5. Thermal Resistance Junction to Case.
6. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Green
