OM-CP-RFOT-A

1. Install the OM-CP Data Logger Software and USB Drivers onto a Windows PC.

2. The OM-CP-RFC1000-EXT interface device comes with a USB cable. Plug one end of the cable into an available USB port on the PC

and plug the opposite end of the cable into the communication port on the OM-CP-RFC1000-EXT.

3. The OM-CP-RFOT-A is shipped with wireless transmission in an active, low power state. During normal use, inserting a USB (micro

B type) cable into the OM-CP-RFOT-A will pass control to the OM-CP software and disable the wireless transmission. When the USB

cable is unplugged, wireless transmission is resumes with settings that were chosen in the OM-CP software.

4. Launch the OM-CP Data Logger Software. All active Omega Data Loggers that are within range will automatically appear in the

connected devices window. Each data logger in the list can be identiﬁed by serial number (imprinted on the probe handle of the

logger).

5. Select the data logger within the Connected Devices window and click the Claim icon.

6. Select the start method, reading rate and any other parameters appropriate for the desired data logging application. Once

conﬁgured, deploy the data logger by clicking Start.

7. To download data, select the device in the list, click the Stop icon, and then click the Download icon. A graph will automatically

display the data.

Quick Start Steps

OM-CP Data Logger Software

A Complete Wireless Data Logging System

Data Logger Interface Device &

USB Cable

(Included accessory with OM-CP-RFC1000-EXT)

Power Adapter

(Included accessory with OM-CP-RFC1000-EXT)

OM-CP-RFOT-A Wireless Data Logger OM-CP-RFC1000-EXT

Wireless Transceiver