WIRELESS SAFETY
PERIMETER
Position several Honeywell BW™
RigRat monitors to form a wireless
safety perimeter.
REMOTE MONITORING
Use with Honeywell’s remote
monitoring software to see gas
readings, location and other data
from any device with an internet
connection — for fast, informed
decisions. Add an optional noise
sensor or meteorological sensor.
HONEYWELL
TOUCHPOINT™ PLUS
COMPATIBLE
Use with the Honeywell
Touchpoint™ Plus controller for visibility
on Honeywell BW™ RigRat monitors
and workers’ personal detectors.
FEATURES AND BENEFITS
Honeywell BW™ RigRat is so easy to use that workers can operate it with confidence,
trusting it to alert them to gas threats in their proximity — indoors and out, in
temperatures from 40 to +140°F (40 to +60°C). Honeywell BW™ RigRat delivers:
• Up to 8 weeks of runtime on a single
charge. Longer runtime than any area
monitor in its class.
• Up to six slots for interchangeable
gas sensors. Choice of
electrochemical, PID, infrared, and
catalytic bead sensors (measuring
percent LEL and percent by volume).
• Integrated Noise sensor and
Metrological data sensors.
• Enhanced configurations with
programmable input and output.
• Approval for explosive atmosphere.
Certified for ATEX/IECEx Zone 0 and
CSA C1D1.
• Flexible applications. Zone
declassification, turnarounds, confined
space, routine maintenance, fence
line and more. Available with pump for
remote sampling.
• One-button operation. Grab and go.
No expertise required.
• Simple setup with a smartphone.
Easy mobile app for alarm set points,
calibration records and more.
• Added protection. Alerts workers to
nearby gas leaks, whereas personal
detectors cover only the breathing
zone.
Transportable Multi-gas Area Monitor
HONEYWELL BW ™ RIGRAT
Comply with safety procedures and protect
workers with the most user-friendly area
monitor of its kind.
OTHER HONEYWELL BW
TM
RIGRAT FEATURES:
• Line power for extended runtime in
the field
• I/O ports providing additional input
capabilities and local executive
activation.
• Inert mode that prevents alarm in
normal ambient air.
• Large, easy-to-read display
• Rugged, weatherproof design, with
optional protective cage
HONEYWELL BW™ RIGRAT TECHNICAL SPECIFICATIONS
INSTRUMENT SPECIFICATIONS (TYPICAL)
MODEL NUMBER BWRR100P/BWRR100D
SIZE 15.8 x 11.4 x 18.5 in. / 40.0 x 29.0 x 47.0 cm
WEIGHT 17.6 lb / 8 kg
GAS SENSOR SLOTS Up to 6
GAS SAMPLING METHOD Pumped or diffusion
BATTERY Rechargeable Li-ion battery (3.7V / 26.4 Ah)
CHARGING TIME Less than 18 hours when instrument is powered off
RUNNING TIME 8 weeks for low-power model; other models vary by configuration
KEYPADS One-button operation and programing
DISPLAY 3.5” 240 x 320 TFT color LCD with white LED backlight
ALARM Red/yellow/green LED alarm; buzzer alarm 108 dBA @ 1 m; on-screen indication of alarm conditions
DATALOGGING Complete gas sensors and instrument information for at least 4 months at one minute intervals
WIRELESS
ISM license free band:
Bluetooth Low Energy Module (BT 4.2 / 5.0), 2.4 GHz, in default;
Mesh Module: IEEE 802.15.4 868 MHz / 915MHz /2.4 GHz (optional); OR
WiFi Module: 802.11 b/g/n 2.4 GHz (optional)
RADIO MODULE & RANGE
Bluetooth Low Energy: RMBLEC, up to 16.4 ft. / 5 m;
Mesh: RM900A, 984 ft. / 300 m (868-900 MHz) or RM2400, 492 ft. / 150 m (2.4 GHz );
WiFi: RMWIFIC, up to 164 ft. / 50 m;
OUTDOOR LOCATION
GPS receiver module: GPS L1 frequency (1575.42 MHz) (optional);
Only with IEEE 802.15.4 868 MHz / 915MHz modem and WIFI
IP RATING IP65 for pumped models; IP67 for diffusion models
TEMPERATURE
4 to +140°F (20 to +60°C) for pumped models;
40 to +140°F (40 to +60°C) for diffusion models
HUMIDITY
5 - 95% RH (non-condensing)
SAFETY CERTIFICATIONS
(PENDING)
cETLus Class I Division 1; Group A, B, C, D; T4;
IEC EX/ATEX
I M1 Ex ia I Ma
II 1G Ex ia da IIC T4 Ga
For LELIR/CO
2
sensor installed:
I M1 Ex ia I Ma
II 2G Ex ia da db IIC T4 Gb
1G Ex ia da IIC T4 Ga
WIRELESS APPROVALS
(PENDING)
FCC Part 15, IC, RED
ROHS (PENDING) RoHS Complaint, Directive (EU) 2015/863
NOISE SENOR
60125 dBA range; (respond: 100 Hz to 8 kHz), 1 dB resolution;
A-weighted 15 second equivalent level; updated every 5 seconds
EXTERNAL PORTS
SAFE AREA CHARGE PORT
(AC CHG SAFE AREA)
Battery charger input 6 VDC 3 A typical; connect to AC/DC adaptor
FIELD CHARGE
(IS CHG HAZARDOUS)
Intrinsically safe line power supply input to extend instrument runtime (low-power model only)
RAEMET PORT (SERIAL) Port to RAEMet wind sensor (optional)
ANALOG/SWITCH INPUT PORT
(420 MA IN)
420 mA signal input, X1 channel/switch on/off signal input, X1 channel (optional)
ON/OFF SWITCH OUTPUT
(SWITCH)
Max 20 V / 120 mA, SPDT Normal Open, X3 channels for external ports (optional). Refer to User Guide for
complete details.