EP cores allow the design of trans-

formers with high inductance, requi-

ring only small space. The compact

design also minimizes stray-fields.

We supply coilformers made in high

Wherever high-temperature solde-

ring processes are used in connec-

tion with EP-series coilformers, we

recommend radiation cross-linked

plastics. This ensures that the

Basically a cross-link enhancer is

added to the thermoplast. The ther-

moplastic components are then

exposed to Beta and/or Gamma

radiation and cross-linking takes

place.

Through cross-linking the material

loses its thermoplastic characteri-

stics. It is, however, not a thermoset

material. In the short term, the

Fully tagged or pinned coilformers

are – in small quantities – usually

available from stock. We can also

quote for coilformers with pins or

tags fitted to your requirements.

addition the modular tooling system

allows extremely short tooling times

and can be very cost effective.

All dimensions in mm/inch. The per-

missible deviations according to DIN

you need further assistance, be it

technical or to assist when planning

your order, we look forward to

hearing from you.

This catalogue contains information on all our

products of the EP-Series