EP-SMD Coilformers (fu)
T
he coilformers are made in gfr
Polyphenylene Sulfide PPS of type
torA504 (RTI long-range tempe -
rature +130°C) and are suitable for
reflow soldering.
P
in material: tin bronze, tinned.
Special materials – e.g. irradiated
cross-linked – and designs on
request, dimensions in mm/
inch).
The coilformers are fitted with
U
-shaped terminals. The two sides
of the terminals allow automatic
binding-on and soldering of the
wires, leaving the pcb-side of the
terminal free from tin. Instead of
glueing the ferrites, use can be
made of the SB-EP Spring-Clips.
Automatic placing of the coilformer
and the ferrites is possible by using
a Snap-on Cap. This cap is spring-
loaded and keeps the ferrites and
coilformer together. Slots in the
Snap-on Caps allow additional
glueing.
M
Ø4.6
7.6
8.8
9.4
9.6
13
15.2
+0.6
15.2
1.8
±0.2
Ø5.8
2.4
2.54
10.16
1
0.512
0.181
0.370
0.598
0.094
0.598 +0.024
0.400
0.039
0.228
0
.346
0.378
0
.299
0.100
0.071±0.008
cba
10
e
6
d
dcba
1
5
e
M
0.100
0.071
0.598 +0.024
0.024
1.8
15.2
+0.6
0.6
2.54
Accessories
Snap-on Cap EP 13/FG
Spring-Clip SB-EP 13
Latching-Clip FB-EP 13
Order-Code
9 0 1 5 0 - 1 3 2
9 0 1 5 1 - 1 3 2
7 5 8 2 6 - 2 1 3
Type
Coilformer: EP 13-SMD2/1k/10f-625-/torA504
Coilformer: EP 13-SMD2/2k/10f-625-/torA504
Solder-pin: fu625-67/ub
Pin Connecting Surface
View pin-side
© 11/2011 by NORWE GmbH
All dimensions in mm/inch
The permissible deviations according to
DIN 16901 apply as tolerances
Warranties:
refer to Terms and Conditions of Sale
NORWE Inc.
P.O. Box 25 11
North Canton, OH 44720-0511
United States of America
Telefon +1-330 497-8113
Telefax +1-330 305-0592
E-mail usa@norwe.com
Internet www.norwe.com
NORWE GmbH
Postfach 13 56
51691 Bergneustadt
Paulstraße 5, Pernze
51702 Bergneustadt
Deutschland
Telefon +49 (0) 27 63-807-0
Telefax +49 (0) 27 63-807-77
E-mail verkauf@norwe.de
Internet www.norwe.de
www.norwe.eu
Valid version of data sheet online