LPC
LPC
LPC
LPC LPC
LPC
LPC
LPC
LPC
LPC
LPC
LPC
FDD, HDD, office automation equipment, communications equipment,
FA machine, etc.
LPC series of 2 mm pitch connectors have been developed to meet market
needs for light weight and small size. These connectors are best suited for
high-density mounting.
LPC series
2 mm Pitch Connectors
Outline
Features
Principal
Applications
Electrical
Characteristics
• Ensures highly reliable contact by using HONDA's unique two-point contact
design.
• Two types of contact surface, tin plate, tin copper plate or gold plate, are
offered, so that selection can be made as required.
• The insulating material is UL-approved.
• These connectors are available in various forms: for use with shunt plugs,
with a simple locking mechanism, and SMT type mounting.
• Cable connection is by either crimping or IDC type.
Rated voltage
Rated current
Insulation resistance
Dielectric
withstanding voltage
Contact resistance
LPC series
125V AC (r.m.s.)
1 A
Over 1000 megohms at 500V DC
500V AC (r.m.s.)
50 milliohms or less
LPC-B series
150V AC (r.m.s.)
1 A per one contact
Over 1000 megohms at 500V DC
500V AC (r.m.s.)
30 milliohms or less
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
mm Pitch
2
Connectors
Dimensions of Connector Mounting for Reference Purposes
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
250
220
180
150
100
0
Temperature (˚C)
Time (s)
30sec
Preheating part 120sec
LPC-A4M( )
LPC-( )MY2CG+
LPC-A( )MB2( )
LPC-A4T2M2LB+C
LPC-A26MB2L+C
LPC-( )FY( )
LPC-B( )MY2( )
LPC-B( )MY2L( )+
LPC series through hole type connector
100~130˚C
260±5˚C
30~60sec
5sec
Part No. of
male connector
LPC-( )M( )
LPC-( )MA( )
7
6.4
A
2
1.4
B
Part No. of
male connector
LPC-( )M2( )
LPC-( )T1M2( )
LPC-( )MA2( )
LPC-( )MB2( )
LPC-( )MC2( )
LPC-( )MD2( )
LPC-( )MH2( )
7
8.4
6.4
9
11
9.8
13
A
2
3.4
1.4
4
6
4.8
8
B
B
A
LPC-( )FD( )
Male connector
LPC-( )FDS( )
B
A
PCB
PCB
Male connector
PCB
PCB
One row type Two row type