HDRA series
0.8 mm Pitch Connectors
Outline
HDRA series connectors have been developed based on the HDR series
products for high speed signal interfaces such as SCSI-III, VHDCI and PCI.
Features
Principal
Applications
• Conforms to the United States ANSI/SFF8441 standards
• Provided with high performance EMI/ESD-shielded structure
• Mounted with locks or screws
• Low profile
• Sequence structure
type personal computers and their peripheral
equipment, and mobile equipment
Electrical
Characteristics
Rated voltage 30V AC (r.m.s.)
Rated current 0.3 A
Insulation resistance Over 500 megohms at 100V DC
Dielectric withstanding voltage 250V AC (r.m.s.)
Contact resistance
70 milliohms or less
(for combination of MA or MA1 and LFDT)
100 milliohms or less
(for combination with MA1 and W1LFDT)
Server, Router, Notebook
mm Pitch
0.8
Connectors
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
HDRA series SMT type for PCB HDRA series through hole type for PCB
100~130˚C
260±5˚C
30~60sec
5sec
150~180˚C
220˚C
250˚C
(Full heating
period)
30~60sec
(Preheating period)
90~120sec
(Peak)