HDR series
Interface Connectors
Outline
HDR series connectors are very small surface mount (SMT) interface
connectors with their contacts arranged at a pitch of 0.8 mm, designed for
the purpose of saving extra space on printed circuit boards.
Features
Principal
Applications
Electrical
Characteristics
• Long-life design allowing up to 5,000 mating cycles
• Low profile with overall height of 5mm from the PCB surface
• Sequential structure allowing up to two stacked connections
• One-touch-lock-type and detachable / re-attachable housing
• IDC type connector on the cable end allows simultaneous termination
Portable information terminals, smaller-sized office automation equipment,
and their peripherals
Rated voltage 125V AC (r.m.s.)
Rated current 0.5 A
Insulation resistance Over 1000 megohms at 250V DC
Dielectric withstanding voltage 350V AC (r.m.s.)
Contact resistance 70 milliohms or less
• EMI/ESD-shielded and over-molded type metal housing
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
mm Pitch
0.8
Connectors
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
The profile shown in this drawing is applicable only for those products shown above.
HDR-EA( )LMYPG1-( )( )+
HDR-EA( )LFYPG1-( )( )+
HDR-EC( )FDT( )-( )+
HDR-EC( )LFDT( )-( )+
100~130˚C
260±5˚C
30~60sec
5sec
150~180˚C
220˚C
250˚C
(Full heating
period)
30~60sec
(Preheating period)
90~120sec
(Peak)