2
INSTALLATION INSTRUCTIONS
AFL TITAN RTD
®
FTTx System
© 2016, AFL, all rights reserved. INS-01013, Revision F, 1.13.2021
Specications are subject to change without notice.
GENERAL
MULTIPORT TERMINAL SPECIFICATIONS
The AFL TITAN RTD
®
Multiport Terminal is a factory terminated OSP ber terminal designed for quick and easy subscriber
connections anywhere in the OSP network when used in conjunction with AFL TRIDENT Hardened Connectors. The
sealed and rugged design of both the AFL TITAN RTD Multiport Terminal and AFL TRIDENT Hardened Connectors allow
for longterm reliability when installed anywhere in the network – underground, in pedestals, on poles or on aerial strand or
ADSS cables.
The preterminated AFL TITAN RTD Multiport Terminal is available with dielectric or toneable at drop cable stubs, allowing
for exibility when engineering the network and consolidation of multiple terminal stubs into one centralized splice point.
The terminal is outtted with four, six, eight or twelve AFL TRIDENT Hardened Connector ports. The AFL TITAN RTD
Multiport Terminal and AFL TRIDENT Hardened Connector are designed and tested to Telcordia GR-771 and Telcordia
GR-3120, respectively.
Lengths ≤350 feet ship coiled in low-prole boxes.
Lengths >350 feet ship on a 33" corrugated plastic reel inside a cardboard box.
Parameter Value
Dimensions - (L x W x H) in. (mm)
4- and 6-port 12.4 x 4.9 x 3.0 (315 x 125 x 76)
8- and 12-port 15.5 x 6.1 x 3.8 (394 x 195 x 96)
Packaging Dimensions (L x W x H) in. (mm)
≤ 350 feet (box) 25.0 x 25.0 x 7.0 (635 x 635 x 179)
≥ 350 feet (reel) 33.0 x 25.0 x 9.0 (838 x 635 x 838)
Weight lbs (kg)
4- and 6-port 1.5 (0.7)
8- and 12-port 2.5 (1.1)
Maximum Span Length at 1% Sag - ft (m) at 60°F Installation
per NECS loading conditions
Light Loading - 550 (167)
Medium Loading - 275 (84)
Heavy Loading - 150 (45)
Maximum Tensile Loading - lbs (N) Install - 300 (1,335)
Minimum Dimension Bend Radius - in (mm) 3.19 (81)