A
CP08-63-06 0919
CP Series
CP08-63-06
Thermoelectric Modules
The Ceramic Plate (CP) Series of Thermoelectric Modules (TEMs) is considered ‘the
standard’ in the thermoelectric industry.
This broad product line of high-performance and highly reliable TEMs is available in
numerous heat pumping capacities, geometric shapes, and input power ranges.
Assembled with Bismuth Telluride semiconductor material and thermally conductive
Aluminum Oxide ceramics, the CP Series is designed for higher current and large
heat-pumping applications.
FEATURES APPLICATIONS
• Precise Temperature Control
• Compact Geometric Sizes
• Reliable Solid-State Operation
• No Sound or Vibration
• Environmentally Friendly
• DC Operation
• RoHS Compliant
• Medical Lasers
• Lab Science Instrumentation
• Clinical Diagnostic Systems
• Photonics Laser Systems
• Electronic Enclosure
Cooling
• Food & Beverage Cooling
• Chillers (Liquid Cooling)
TECHNICAL SPECIFICATIONS
Hot Side Temperature (°C)
25
50
Qmax (W)
9.0
9.9
Delta Tmax (°C)
67
75
Imax (Amps)
2.1
2.1
Vmax (Volts)
7.6
8.2
Module Resistance (Ohms)
3.13
3.53
SUFFIX
THICKNESS (PRIOR TO THINNING)
FLATNESS & PARALLELISM
HOT FACE
COLD FACE
LEAD LENGTH
L
0.134”±0.010”
0.0015”/0.0015”
Lapped
Lapped
4.5”
L1
0.134”±0.010”
0.001”/0.001”
Lapped
Lapped
4.5”
L2
0.134”±0.0005”
0.0005”/0.0005”
Lapped
Lapped
4.5”
ML
0.138”±0.010”
0.002”/0.002”
Metallized
Lapped
4.5”
LM
0.138”±0.010”
0.002”/0.002”
Lapped
Metallized
4.5”
MM
0.142”±0.010”
0.002”/0.002”
Metallized
Metallized
4.5”
SEALING OPTIONS
SUFFIX
SEALANT
COLOR
TEMPERATURE RANGE
DESCRIPTION
RT
RTV
White
-60 to +204 °C
Non-corrosive, silicone adhesive
EP
Epoxy
Black
-55 to +150 °C
Low density syntactic foam epoxy encapsulant
CP08-63-06 0919
CP08-63-06
Thermoelectric Modules
PERFORMANCE CURVES AT Th = 25° C
MECHANICAL DRAWING
www.lairdthermal.com
Laird warrants to the original end user customer of its products that its products are free from defects in material and workmanship. Subject to conditions and
limitations Laird will, at its option, either repair or replace any part of its products that prove defective because of improper workmanship or materials. This limited
warranty is in force for the useful lifetime of the original end product into which the Laird product is installed. Useful lifetime of the original end product may vary but is
not to exceed five (5) years from the original date of the end product purchase.
Any information furnished by Laird Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and
application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness,
merchantability or suitability of any Laird materials or products for any specific or general uses. Laird shall not be liable for incidental or consequential damages of any kind. All Laird
products are sold pursuant to the Laird Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request.
© Copyright 2018 Laird Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Logo, and other marks are trademarks or registered trademarks of Laird Inc. or an affiliate
company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights.
NOTES:
Maximum Operating
Temperature: 80°C
Do not exceed Imax or Vmax
when operating module
Reference assembly guidelines
for recommended installation
Solder tinning also available on
metallized ceramics