CSI/AIA Specifications DIGITAL NETWORK LIGHTING CONTROLS SECTION 26 09 43 13

Leviton 1/14/2021 DIGITAL NETWORK LIGHTING CONTROLS

GreenMAX DRC 26 09 43 13-1

Leviton Manufacturing Co., Inc.

201 North Service Road

Melville, NY 11747

Phone: 1.800.824.3005

Fax: 1.800.832.9538

SECTION 26 09 43 13

DIGITAL NETWORK LIGHTING CONTROLS

Leviton GreenMAX DRC

This specification is dated January 14, 2021. It replaces any and all previous GreenMAX DRC

specifications.

PART 1 – GENERAL

1.0 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including General and Supplementary

Conditions and Division 1 specification Sections.

B. All contract documents and addenda.

1.1 SUMMARY

A. Section Includes:

1. Digital network lighting control system.

B. Related Sections:

1. Section [262726 — Wiring Devices].

2. Section [265113 — Interior Lighting Fixtures, Lamps, and Ballasts:] LED and

Fluorescent lighting ballasts controlled by lighting control system.

3. Section [260923 — Lighting Control Devices:] Occupancy Sensors, Photocells and

Digital Switches used in conjunction with lighting control system.

4. Section [260943.16—Addressable Luminaire Level Lighting Controls:] Integrated

Fixture Controls with Addressable Luminaires.

C. Contractor responsibilities:

1. Coordinate, receive, mount, connect, and place into operation all equipment. Furnish

all conduit, wire, connectors, hardware, and other incidental items necessary for the

complete and properly functioning relay lighting control system as described herein

and shown on the plans.

1.2 REFERENCES

A. American National Standards Institute/Institute of Electrical and Electronic Engineers

(ANSI/IEEE) C62.41-1991 — Recommended Practice for Surge Voltages in Low-Voltage

AC Power Circuits.

B. ASTM International (ASTM) ()

CSI/AIA Specifications DIGITAL NETWORK LIGHTING CONTROLS SECTION 26 09 43 13

Leviton 1/14/2021 DIGITAL NETWORK LIGHTING CONTROLS

GreenMAX DRC 26 09 43 13-2

1. D4674 -02a Standard Test Method for Accelerated Testing for Color Stability of

Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight.

C. Canadian Standards Association (CSA) ().

1. CSA C22.2 # 14 Industrial Control Equipment

2. CSA C22.2 # 184 Solid-State Lighting Controls

D. International Electrotechnical Commission ().

1. (IEC) 801-2 Electrostatic Discharge Testing Standard.

2. IEC/EN 60669-2-1 Switches for household and similar fixed electrical installations -

electronic switches.

E. International Organization for Standardization (ISO)

1. 9001:2000 — Quality Management Systems.

F. National Electrical Manufacturers Association (NEMA) WD1 (R2005) - General Color

Requirements for Wiring Devices.

G. Norma Official Mexicana (NOM).

1. NOM-003-SCFI Productos eléctricos - Especificaciones de seguridad (Electrical

products - Safety Specifications)

H. Underwriters Laboratories, Inc. (UL) ():

1. 508 (1999) - Standard for Industrial Control Equipment.

2. 924 – Standard for Safety of Emergency Lighting and Power Equipment

I. International Energy Conservation Code (IECC).

1. IECC

J. American Society of Heating, Refrigerating and Air-Conditioning (ASHRAE).

1. ASHRAE 90.1

K. California Energy Commission (CEC).

1. Title 24

1.3 SUBMITTALS

A. Submit under provisions of Section [01 33 00] and in accordance with Conditions of the

Contract. Submittal Set shall include the following:

1. Bill of Materials: Complete list of all parts needed to fully install selected system

components.

2. System One-Line Diagram.

3. Device detail drawings providing wiring details and dimensional data.

4. Product Data Sheets.

1.4 CLOSEOUT SUBMITTALS

A. To be provided within two weeks following system turn-on.

1. Warranty documents specified herein.

2. Operation and maintenance manuals in digital format (PDF format).

3. As-built drawings in digital format (PDF format).