Pass and Seymour
Support Grips Standard Duty, Split Rod
Part No. FR150OF
Standard-duty, Split rod, Offset eye. Cable diameter - 1.500-1.740-
inch, Bale length - 5-inch, Mesh length - 18-inch, Break strength -
1,680 lbs.
Features & BenefitsFeatures & Benefits
Split rod support grips are designed for loads up to 600 lbs. Vertical runs of no more than 100 ft.
They are available in a variety of eye styles and cable ranges for
supporting electrical and fiber optic cable, metal rods, and
tubing.
Split rod support grips are used when the end of the cable
cannot be easily accessed and the installation is temporary.
Support grips are woven of corrosion-resistant tinned-bronze
wire.
Most Flexcor products have UL and/or CSA approvals.
Please contact factory for approval information.
SpecificationsSpecifications
General InfoGeneral Info
UPC NumberUPC Number
785007982572
Country Of OriginCountry Of Origin
Mexico
Product LineProduct Line
Pass & Seymour
Application SectorApplication Sector
Industrial
ConstructionConstruction
Various Types of Pulling, Support and Strain
Relief Grips
StandardStandard
UL/CSA Approval (consult factory)
Technical InformationTechnical Information
MountingMounting
Consult the Factory for Mounting
Recommendations
Cable SizeCable Size
Cable Dia. Range: 1.500-1.740: Bale
Length: 5: Mesh Length: 18
CapacityCapacity
Various Cable Diameter Ranges
LoadLoad
Approx. Break Strength: 1,680
March 10 2022 - For latest specs visit legrand.us